1 2

Stainless Steel Bubbler for CVD Liquid Precursors (150, 300, 600 or 1000ml) - BLSS

Stainless Steel Bubbler for CVD Liquid Precursors (150, 300, 600 or 1000ml) - BLSS

Minimum Order: $20 (equipment), $100 (crystals)

Low stock: 7 left

$785.00 USD
$785.00 USD
Sale Email for Lead Time

SKU:  BLSS150

Volume
View full details

In typical CVD processes, The Bubbler/Flash Evaporator is used for transporting chemical precursors and liquid sources in the vapor phase. Such a unit features two stainless steel needle valves with 1/4'' Tube Fittings allow carrier gas bubble through the liquid sources to enhance evaporation. Its leak-free 316 Stainless Steel vessel is able to withstand pressure up to 0.15Mpa @ 250°C. Please choose150mL, 300mL, 600mL and 1000 mL at product option bar.

SPECIFICATIONS:

Model#

BL-SS-150

 BL-SS-300

 BL-SS-600

 BL-SS-1000
Vessel Volume  150ml 300ml 600ml  1000ml
Vessel Dimensions

Inner: Φ45 x 84mm
Outer: Φ51 x 104mm

minimum liquid: 5 mm 

 Inner: Φ45 x 180mm 
Outer: Φ51 x 187mm
 Inner: Φ70 x 154mm
Outer: Φ76 x 200mm
 Inner: Φ70 x 258mm
Outer: Φ76 x 300mm
Tool

KF-40 Quick Clamp Set

KF-40 Quick Clamp Set

C Spanner (78-85 mm)

C Spanner (78-85 mm)
Overall Dimensions 130x70x340mm (LxWxH) 130x70x440mm (LxWxH) 130x90x440mm (LxWx H) 130x90x540mm (LxWxH)

Heating Capability

 Optional Heating Jacket EQ-HC-BL with built-in K-type thermocouple
<150°C <150°C <150°C <150°C
Vessel Material 316 Stainless Steel
O-ring Fluoroelastomer (FKM)
Sealing Material in Valve Soft PTFE
Pressure Gauge -0.1 ~ 0.15 Mpa
Max. Pressure 0.15Mpa
Fittings Two SS needle valves with 1/4" Tube Fittings (PTFE frit as sealant)
Application Notes
  • The vessel should be cleaned after each use to prevent contaminants and bacteria build-up.
  • Never heat the source liquid inside the vessel near its boiling point without opening valve
  • You may order precision MFC to deliver vapor
  • Please (click the picture below-right 3) to see our updated Liquid Vaporization Systems for CVD
  • Please click to choose MTI CVD furnaces to build your own system.

 

×

MTI offers a One-Year limited warranty for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as Graphite dies, O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: