1 5

Complete CIP Die Set (110 mm ID, Max. 350 MPa Vessel) for Cold Isostatic Press - CIP110D350

Complete CIP Die Set (110 mm ID, Max. 350 MPa Vessel) for Cold Isostatic Press - CIP110D350

Out of stock

Price: RFQ

SKU: CIP110D350

Choose your Variant:



View full details
EQ-CIP110-DIE is a Complete CIP Die Set (Max. 350 Mpa Vessel) for Cold Isostatic Press, which has a chamber of 110 mm ID x 80 mm effective depth a. It is an excellent tool for preparing Max. 4" dia. x 3" H sample with a much high-density.

Specifications:
CIP Vessel size
  • 110 mm I.D. x 210 mm Deep.
  • Effective sample Deep: 80 mm Max.
Vessel Pressure
  • Material: 2Cr13 alloy 
  • Pressure Range: 0 - 350 Mpa
  • Pressure Speed: Mpa / min
  • Pressure force required: 335 T ( Max)
  • O-ring is consumable
  • 10 pcs O-rings are included
Note
  • Never let the press hold the target pressure be longer than 8 minutes
  • It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order). Check this link to understand liquid rubber for sample preparation. 
  • You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order)
  • You may use the machine as a dry pressing to order pressing die (click Pic below right)

 

Pic. 1  Pic. 2 Pic. 3

 
Packing List:
Name Qty
1 CIP pressing die 1 set
2 Black Rubber Rings O.D 110 mm  10 pc
3 Holding bar (for carrying the CIP pressing die) 2 pc
4 Pressing oil 1 bottle
5 Hex-socket wrench (for the top pressing die and degassing) 1 pc

 

×

MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: