• 500 MPa CIP Die Set ( 30 or 50 mm ID.) for Cold Isostatic Press - EQ-CIP500-DIE
1 4

500 MPa CIP Die Set ( 30 or 50 mm ID.) for Cold Isostatic Press - CIP500-DIE

500 MPa CIP Die Set ( 30 or 50 mm ID.) for Cold Isostatic Press - CIP500-DIE

Low stock: 2 left

Price: RFQ

SKU: CIP30D500

Choose your Variant:



View full details
CIP500-DIE is 500 Mpa ultrahigh-pressure CIP Die Set. It is selectable for two kinds of chamber: size: 30mm ID x110mm or 50mm ID x150mm H. It can provide isostatic hydraulic pressure up to 500 MPa via a hydraulic press. It is an excellent tool for the material research lab to prepare high-density compound samples at ease. 
 
Specifications:
Pressure Vessel Size
  • Two kinds of the chamber: (pressing die cavity)
    • 30mm ID. x 110mm Height 
    • 51mm ID. x 150mm Height ( Effective depth ~70 mm )
    • ID tolerance : +/- 0.01 mm
Max. Hydraulic Pressure in Chamber
  • 500 MPa 
Material
  • Cr12MoV
 Rubber O-ring
  • Special rubber O-ring is consumable
  • 20 pcs O-ring is included for each die
Hydraulic Machine
  • 37 T for 30 mm ID
  • 98 T for 50 mm ID
  • For safety reasons, the die only supply the customer who uses MTI CIP pressing machine
Operation Temperature 10 - 40°C
Maximum pressure holding time 5 minutes (The time starts from the press reaches the target pressure value and ends by releasing the pressure)
Operation Video and Instructions  
  
Operation Video O-Ring Installation
Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order). Check this link to understand liquid rubber for sample preparation. 
  • You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order)
  • You may use the machine as a dry pressing to order pressing die (click Pic below right)
  • Pic. 1  Pic. 2 Pic. 3
Warning
  • Never let the press hold the target pressure be longer than 8 minutes,
  • It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period.
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
  • If you order the die only and use your own press machine, MTI is not responsible for the safety


Packing List:
Name Qty
1 CIP pressing die 1 set
2 Black Rubber Rings O.D (30mm) 1 pc
3 Pressing oil 1 bottle
4 Hex-socket wrench (for top pressing die and degassing) 1 pc

 

×

Dimension:

  • 30mm ID
  • 51 mm ID

Shipping Weight & Dimension:

  • TBD

MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: