• 300 Mpa Vessel CIP Die Set (60 mm IDfor Cold Isostatic Press, EQ-CIP60-DIE
1 2

300 Mpa Vessel CIP Die Set (60 mm IDfor Cold Isostatic Press, - CIP60-DIE

300 Mpa Vessel CIP Die Set (60 mm IDfor Cold Isostatic Press, - CIP60-DIE

Low stock: 1 left

Price: RFQ

SKU: CIP60D250

Choose your Variant:



View full details
CIP60-DIE is a Complete CIP Die Set (Max. 300 Mpa Vessel) for 85Tons Cold Isostatic Press, which has a 60mm ID x 160mm depth chamber up to 300 Mpa. It is an excellent tool for preparing 2“ ceramic sample with a much high density.

Specifications:
Hydraulic cylinder pressure 0 - 85 T
(100 T hydraulic press is required)
CIP Vessel size
  • 60 I.D. x 160D. mm (Effective Depth ~80mm)
  • Die total height is 340 mm with the top pushing rod
  • 330 ml hydraulic oil required - ~ 40mm to top
Vessel Pressure
  • 0 - 300 Mpa
  • 1 Mpa / 5 min
  • Warning: sealing rubber O-ring is consumable, and need replacing as the suggest as the table below
  • 10 pcs sealing O-rings are included for replacement. Spare O-ring is available upon request
Gauge Displayed Pressure Value (Mpa) Recommended Max and a short time
Actual Force Applied on the Hydraulic Cylinder (Ton)  56.5  72  84.7
CIP Die Pressure (Mpa) vs 6 CM ID Vessel  200  255  300
O-Ring life for replacement > 10 time  10 times  3 times







Operation Instructions
 
Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order).  Check this link to understand liquid rubber for sample preparation. 
  • You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order)
  • You may use the machine as a dry pressing to order pressing die (click Pic below right)
  • Pic. 1  Pic. 2 Pic. 3
Warning
  • Never let the press hold the target pressure be longer than 8 minutes
  • It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
Die Sleeve, Upper Die Core 
and two handles 
 Die Cavity (60mm I.D) 
filled with hydraulic oil
100 T Electric Hydraulic Press
Packing List:
Name Qty
1 CIP pressing die 1 set
2 Black Rubber Rings O.D 60 mm  10 pc
3 Holding bar (for carrying the CIP pressing die) 2 pc
4 Pressing oil 1 bottle
5 Hex-socket wrench (for top pressing die and degassing) 1 pc

 

×

Net Weight:

  • TBD

MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: