• CIP Die Set (80 mm ID, Max. 300 MPa Vessel) for Cold Isostatic Press, EQ-CIP80-DIE
1 2

CIP Die Set (80 mm ID, Max. 300 MPa Vessel) for Cold Isostatic Press, - CIP80-DIE

CIP Die Set (80 mm ID, Max. 300 MPa Vessel) for Cold Isostatic Press, - CIP80-DIE

Out of stock

Price: RFQ

SKU: CIP80D300

Choose your Variant:



View full details
EQ-CIP80-DIE is a Complete CIP Die Set (Max. 300 MPa Vessel) for Cold Isostatic Press, which has an 80mm ID x 180mm depth chamber. It is an excellent tool for preparing a 2" - 3“ sample with a much higher density.
Specifications:
CIP Vessel size 80 I.D. x 135 Deep. mm
Vessel Pressure
  • 0 - 300 MPa
  • 1 MPa / 5 min
Actual Force Applied on the Hydraulic Cylinder (Ton)  100 150 
CIP Die Pressure (Mpa)   200 300




Operation Instructions

Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order). Check this link to understand liquid rubber for sample preparation.
  • You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order)
  • You may use the machine as a dry pressing to order pressing die (click Pic below right)
  • Pic. 1  Pic. 2 Pic. 3
Warning
  • Never let the press hold the target pressure be longer than 8 minutes
  • It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
Die Sleeve, Upper Die Core 
and two handles 
 Die Cavity (80mm I.D) 
filled with hydraulic oil
100-200 T Electric Hydraulic Press
Packing List:
Name Qty
1 CIP pressing die 1 set
2 Black Rubber Rings O.D 80 mm  10 pc
3 Holding bar (for carrying the CIP pressing die) 2 pc
4 Pressing oil 1 bottle
5 Hex-socket wrench (for top pressing die and degassing) 1 pc

 

×

MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: