• Contact parts in SS 316 and non-contact parts SS 304
• Single Pot Technology for mixing, granulating, drying & coating
• Shorter cycle time
• Highest Degree of Safety
• Spaying system with the precise flow control peristaltic pump
• Spraying flow rate controlled by the Peristaltic pump manually
• Spraying nozzle 0.7 mm size that can be installed in either top or bottom
• Inlet Air system with filter and electric heater
• Airflow control by AC Frequency Drive for Exhaust Blower
• Sight Glass for process visualization
• Air pressure controls switch for safety
• All rubber seal made from silicon food grade
• Easy mechanism to change from process of granulation to coating

• AC 208V 50/60Hz, Three Phases
• 3.5 KW
• The power plug is not included. Please click here to order the plug according to your lab requirement

• 7" Touch Screen Panel to display and set all parameters
• USB port built-in

• 5 Liter made of SS 304 ( SS 316 is available upon request at the extra cost )
• The one spray gun port  on top  and one in the bottom
• Spare spray port on the top of the container is available upon request at the extra cost
  

• 25g Min. and 300g Max.  

• 40 - 150C with accuracy +/- 2C

• One spray gun  included, which can be installed either on top or bottom according to your application
• Nozzle hole 0.7mm diameter
  
• The spare spray gun  is available at the extra cost
• Optional:  Temperature controlled nozzle up to 450ºC is available upon request at the extra cost.

• Pressure: 7 bar
• Airflow: 0-150 m/h

Peristaltic pump

• Max. 1000ml/h

• < 60db

• Electrical Supply 3 Ph Model with Max. 20KW
MTI is designing and developing a special CZ crystal grower from vacuum levitation melting up to 2000ºC. The system includes a high-frequency induction heating supply,  high vacuum chamber, water cold copper crucible for levitation melting and precision pulling mechanism.    Levitation melting avoids the contamination of the sample from the crucible and may produce high purity crystal for metallic alloys

Basic Specifications:



Structure of Grower	40KW RF Induction power source for levitation melting Special designed water-cooled copper crucible for 60 g max. metal melt levitation. Vacuum Chamber which can reach q10-6 torr by a turbopump system Precision pulling system with a rotary rod with speed 0.1 mm/h - 24 mm/h
RF Induction Power Source	Input power  40KW Max. Frequency    80-200KHz Current         10-100A Input Voltage:   200V +/-10% , Three-phase, 50/60Hz Water Cooling Pressure  0.2MPa  Water flow:  10L/min
Water Cold Copper Crucible	Crucible size:            ID 35mm,   Depth: 60mm Melting Capability:      60g  Max. Water flow requied  58L/min
Pulling Mechanism	Pulling Speed:                       0.1-24mm/h  Pulling Rod Rotation Speed  0.03-50r/min Pulling travel distance:        250 mm Faster travel:                        Manual operation  Optional:    Water cold pulling rod is available upon request at extra cost.
Vacuum Chamber & Vacuum Pump	Made of SS 304 with water cooling jacket Vacuum Chamber size: Φ400x 40 D mm Quartz Widow:              Φ300mm Two KF-25 port for gas inlet and outlet Vacuum Level:  10-6 Torr by turbopump Vacuum Pump: high-speed turbopump with 700L/S
Water Cooling	> 110 L/Minute at 30oC  recirculating water flow is required  The water chiller is not included.  please click picture left to order
Compliance	CE certified NRTL or CSA certification is available upon request at the extra cost Assembling and quality controlled in the USA
Warranty	One Year limited warranty and lifetime technical support
Demo Video	<111> Orientation NI alloy single crystal is grown in this device

• Air pressure: 7 Bar

• 700 x 600 x 1150 mm

                                    
        Powder Granulation     Powder Coating                         

• 135 Kg