STX-50QX is a diamond wire curve cutting machine, which is designed for cutting irregular shapes samples of non-conductive materials, such as ceramics, and polymer composite. The machine is controlled by the included PC and software. As long as inputting a 2D drawing, it will cut the sample automatically.
SPECIFICATIONS:
| Power |
- AC220V+/- 10%, 50/60Hz
- 500W
- AC110V version is available via a 1000W transformer
|
| Cutting Parameters |
- X-axis slide travel: 0 - 100mm
- Y-axis slide travel: 0 - 150mm
- Max. cutting depth: 50 mm
- Travel resolution: 0.01mm
- X / Y axis travel speed: 0.06-6mm/min
- Diamond wire moving speed: 15m/s max.
- Sample holding platform: 140mm x 275mm
- Max. ample size to cut: 100mm x 150mm x 50mm
|
Control PC and
Software |
- Dedicated with pre-installed software
- The engineering drawing of the sample can be made via the software on the PC
- Cutting parameters can be set up in the PC, and push button to operate automatically
|
| The materials for cutting |
- The machine can cut almost every type of material as long as its hardness is less than diamond
- Especially good at cutting non-conductive material, which EDM can not be cut
- It also can cut metallic material at low speed than EDM
- Can cut any curve and straight line
|
|
Dimension & Weight
|
- L 960mm x W 830mm x H 964mm
- 200 kg
|
| Compliance |
- CE certified
- NRTL or CSA certification is available upon request at the extra cost
|
| Reference Video |
|
| Application Note |
- Different material requires different cutting parameters
- It is the customer's responsibility to find the best cutting parameter.
- Diamond wire is consumable. Usually, service life is less than 30 hours at 1- 2 mm/minute cutting speed. Please prepare enough spare diamond wires
- Online training is available upon request at a reasonable cost
|
