1 4

Vacuum Sealing Assembly for 60mm dia Tube Furnace with Valve / Vacuum Meter - FL-60

Vacuum Sealing Assembly for 60mm dia Tube Furnace with Valve / Vacuum Meter - FL-60

Minimum Order: $20 (equipment), $100 (crystals)

Shipping and handling will be applied

18 in stock

$698.00 USD
$698.00 USD
Sale Email for Lead Time

SKU:  FL60

Add-Ons

60 OD x 53.5 IDx 250L mm Half Open Quartz Tube for DIY Tube Furnace/induction Heater - HQT60
60 OD x 53.5 IDx 250L mm Half Open Quartz Tube ...
$89.95
2.36" x 2 1/8" (60 OD x 54 ID x 790mm L) Alumina Ceramic Tube - TA-60D-M790-LD
2.36" x 2 1/8" (60 OD x 54 ID x 790mm L) Alumin...
$825.00
Alumina Foam Block: 50 mm Diameter (one pair) for MTI's 60mm Dia Tube Furnace - FTB50
Alumina Foam Block: 50 mm Diameter (one pair) f...
$49.98
Quartz Block: 50 mm Diameter (one pair) for 60mm O.D Tube Furnace - QTB50
Quartz Block: 50 mm Diameter (one pair) for 60m...
$108.00
Adjustable Flange Support (320 - 510mm H) for KF40 Flanges -KF40FLS
Adjustable Flange Support (320 - 510mm H) for K...
$98.00
View full details

This is a pair of smart sealing assembly for tube vacuum furnace to tighten both ends of OD 60 mm without any welding and gluing.

SPECIFICATIONS

Package included One flange with gauge and valve, one flange with valve, two steel sealing rings, four high-temperature silicone O-rings ( 300°C Max)., and six screws
Vacuum Level

Features
  • Made of Stainless Steel with double high-temperature silicon O-rings on each flange.
  • Two flanges as one side. One end flange has a vacuum meter with valve, and another end has valve.
  • Seal tube by tightening screws on the flange without any welding and glue.
  • 1/4" in diameter vacuum sealing assembly will connect with 1/4" rubber hose.
  • Designed for MTI GSL1600-60X tube furnace.
  • Excellent for any type of tubing: ceramic, glass, quartz and steel pipe.



Optional Parts		                    

Warning
  • Must put a refractory tube block in front of the flange ( see picture below ) to avoid heat radiation melt silicone O-ring. You order a ceramic block in related products.
  • Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs.
  • For liability considerations, MTI does not recommend or endorse the use of any toxic, flammable or corrosive gases with our flange assemblies. Please contact us with any concerns.

Optionals		 Click here to choose flange for tube from 1" to 11"                                       Vacuum Pump & High Vacuum Station
                     Stainless Steel Sealing Flange Assembly for 1"-11" Processing Tubes                                                                                         Vacuum pump and high vacuum station

 

×

Manufacturer Part Number: 

Related Products

Adjustable Flange Support (320 - 510mm H) for KF40 Flanges -KF40FLS
Adjustable Flange Support (320 - 510mm H) for KF40 Flanges -KF40FLS
$98.00