GSL-1200X-MGI-8 is a compact 8 channels tube furnace with 20mm O.D. and sealing flange for high throughput heat treatment research of alloy and ceramic material up to 1200°C. t is an excellent tool to research phase diagrams in MGI new generation material.
SPECIFICATIONS:
Furnace Structure
|
- The furnace consists of 8 small tube furnace modules with quartz tube 20mm O.D. x 17mm I.D. x 192mm L
- Each heating module is separated by insulation material with air cooling layer, no temperature influence each other
- Each heating module's temperature is controlled independently up to 1200°C
- Quick seal flange, vacuum gauge, and flow meter are installed to allow heat treatment under vacuum or flowing gas
- Processing 8 samples with different temperatures at compact space
- The furnace system consists of two units: a furnace and a transformer box
|
| Heating Element |
|
|
Working Temp. &
Constant Temp. Zone
|
- Continuous Working Temperature 1100°C
- Maximum Working Temperature 1200°C (< 1 hrs)
- Constant temperature zone:
- +/- 2°C within the center 20 mm cubic zone
- +/- 5°C within the center 55 mm cubic zone
|
Processing Tube & Flange
|
- 8 High purity Quartz tubes with 20mm O.D. x 17mm I.D. x 192mm L are included
- 8 Quickly clamped flange with 1/8 gas inlet and outlet, as well as vacuum ports are built-in (see pic below)
-
16 needle valves are optional to connect to the gas inlet and outlet for gas flow control
- 8 vacuum ports in the back will be connected to the vacuum pump via 8 to 1 adaptor
- Only one vacuum pump is required via a KF25 port. Click the picture below to choose a vacuum pump
- Max. Vacuum 10^-2 torr by a mechanical pump and 10^-5 torr by turbopump
|
| Temperature Control |
- 8 channel heating tube is controlled independently by 30 segments programmable temperature controller
- 8 K type Thermal Couple
- PC control software is included, which can control 8 channel heaters by one Laptop
|
|
Heating Rate
|
|
|
Temperature Accuracy
|
|
|
Power & Working Voltage
|
- 2.5 KW, 208 - 240V single phase, 50/60Hz (if 4 heating modules operate at the same time )
- Note: Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug
|
|
Laptop, software (Optional)
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) available at extra cost.
-
Labview-Based Temperature Control System (MTS01)enables the user to edit temperature profiles, manage heat-treatment recipes, and record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters of operating range.
|
| Gas Manifold (Optional) |
- Gas flow control is at an extra cost.
- MTI recommends using the following 8-channel gas delivery systme for individual gas control.
-
- If vacuum is desired, please contact MTI for more information.
|
| Compliance |
- CE Certified
- NRTL (UL61010) or CSA certification is available at an extra cost
|
|
Warning &
Application note
|
|
