GSL-KR200 is a combustion gas module to dispose of residual flammable gas via a self-ignition heating coil. It is designed to pair with any MTI tube and atmosphere furnaces. It can also control the gas flow rate and communicate with a Honeywell hydrogen gas detector. It is a good choice for experiments under a reducing environment, such as hydrogen flow.
SPECIFICATIONS
Power |
|
Voltage |
- 110V, 208-240VAC, single phase, 50-60Hz
|
Features
|
- Applicable to dispose of various residual flammable gas along the exhaust line (designated gas needs to be discussed with MTI in advance).
- Compact, modularized, and compatible with various MTI furnaces.
- Interlocks: in case of emergency, the gas flow and furnace heating will be cut off.
- a flammable gas leak is detected
- Failure of a self-ignition heating coil
- One check valve to prevent gas backflow.
- Two solenoid valve allows users to choose the flow type, inert or flammable.
|
Flow rate |
- One float flow meter (100-1000 sccm, air)
|
Gas Inlets |
- Two 1/4" compression tube fittings for both inert and flammable gas.
|
Hydrogen Gas Detector
|
The hydrogen gas detector is connected externally. If alarmed, the hydrogen gas and furnace heating function will be cut off. The alarm is preset at 20% LEL for hydrogen.
|
Dimension
|
360L × 340W × 400H (mm)
|
Net Weight
|
About 5Kg
|
Safety WARNING
|
- If equipped with a tube furnace, a metallic mesh cover must be installed at both ends of the furnace tube in case of emergency
- The furnace and the combustion equipment must be placed in a well-ventilated place, or in a fume hood
- The hydrogen detector must be installed
- Operators must be trained by qualified technicians & follow the safety guideline of the laboratory
|
Warranty
|
|
Reference Video
|
|