1 3

1200°C max. 3-Zone Tube Furnace( °150mm, 6" Max) with Tube & Flange - GSL1200XIII6

1200°C max. 3-Zone Tube Furnace( °150mm, 6" Max) with Tube & Flange - GSL1200XIII6

Price: RFQ

SKU: 

Choose Your Variant or Type in Any Add-Ons:



View full details

GSL1200XIII6 is a 6" ( 150 mm) dia. solid tube furnace with 3 heating zone and a 1200oC working temperature The tube furnace equips with a touch screen control system, that allows a one-click start/stop multi-temperature zone, the automatic recording. The temperature profile can pre-store up to 5 programs. The furnace can accept quartz tubes with the optional diameter f 80, 100, 130, and 150mm. Vaccum-sealed stainless steel sealing flanges is available as an option for the heat treatment of sample under a controlled atmosphere

SPECIFICATIONS:

Furnace Structure
  • Touch screen control with one-click start/stop multi-temperature zone
  • Automatic record (stored for 1 month)
  • Preset temperature curve function
  • Energy-saving high-purity Al2O3 fibrous insulation liner with an aluminum oxide coating
  • Extended lifespan
  • Solid tube insulation provides a more uniform temperature zone
Power
  • AC220V 50/60HZ, single phase
  • 12kW
  • Power cable is included without plug ( The plug may be available upon request )

Working Temperature
  • Max. Temperature: 1200 °C (< 30 min)
  • Continuous working temperature: 1100 °C
  • Max. Heating Rate: 10°C /min
Heating Zone
  • Heating Zone Length: 700mm (total)
    • ZONE 1: 152.5mm6”
    • Spacing: 40mm
    • ZONE 2:315mm(12.4”)
    • Spacing: 40mm
    • ZONE 3: 152.5mm6”
  • ±2 Constant Temperature Zone: ~ 420 mm ( if set 3 zones at the same temperature)
    ±5 Constant Temperature Zone: ~ 620 mm ( if set 3 zones at same temperature)

Temperature Controller
  • 7" touch screen control panel
  • PID automatic control and auto-tune function.
  • 50 programmable segments for the precise process
  • Built-in protection for overheated and broken Thermal couple
  • Temperature Accuracy: +/- 0.2 °C
  • K-type thermal couple 
  • Slope or Time mode for the temperature curve function
  • Optional Computer Software(controlling TEMP curve and exporting data) at extra cost

Temperature Calibrator Kit
(Optional at extra cost)
       
Processing Tube & Tube Adapter, and vacuum-sealed flange
(Sold Separately) 
Pic. 1  Pic. 2Stainless Steel Sealing Flange Assembly for 1"-11" Processing Tubes{Poc. 3  Pic. 34

Vacuum Pressure
(Sold Separately)
  • 50 m-torr can be achieved by a mechanical pump
  • 10^-5 torr and 10-6 torr can be reached by turbopump
   
Application Notes

Click here to learn about the installation of a gas regulator
  • Tube furnaces with quartz tubes are designed for use under vacuum and low pressure < 0.2 bars 
  • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn about the installation of a gas regulator.
  • The vacuum limit for all quartz tube furnaces is < 1000oC.
  • The flow rate for gases should be limited to< 200ml/min)for reducing thermal shocks to the tube
  • Please click here to see our typical temperature profile calibration results at various temperatures.
  • In order to obtain accurate temperature inside a tube furnace, please click here to learn how to calibrate the temperature on your own.
  • How to set up a ceramic tube and vacuum flange for MTI tube furnaces.
WARNING
  • If the end-user has to close the valve to heat the sample, ALWAYS pay attention to the pressure gauge indicator. BE SURE the pressure is lower than 0.02 MPA(use a relief valve) to prevent accidents. The end user is responsible for taking the relevant protection and explosion-proof measures, and all the consequences when processing any flammable, explosive, or toxic gases.  MTI DO NOT recommend processing within any flammable, explosive, or toxic gases.
  • The equipment must work under the independent power supply network, and the voltage range of the power supply network should be within ± 8%
  • DON'T share the power supply with the equipment of high magnetic fields such as intermediate frequency and high frequency, stay away from the equipment of intermediate frequency, and prevent the space electromagnetic radiation
  • Keep away from liquid spatter
  • Keep away from conductive powder

 

×

Dimension:

  • 1620mm(L) x 550mm(W) x 730mm(H)

Weight:

  • ~ 136kg

MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as Graphite dies, O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: