OTF-1200X-S-FB contains a single temperature zone vertical tube furnace, nickel-based alloy tube, and a re-feeder with a KF25 port. It is a CVD experimental equipment specifically for the deposition of the powder surface with a max working temperature of 1100C and 3 bar gas pressure
| Specifications |
- Voltage: AC 110V 60HZ ( 2208 - 240VAC is available upon request )
- Power1.2KW
- Working Pressure: -0.1 ~ 0.3MPa (1100)
- Maximum Temperature 1100≤30min
- Continuous Working Temperature 1000
- Recommend Heating Rate ≤10/min
- Heating Zone 200mm
- Thermocouple K Type
|
Heating furnace
|
- Fibrous alumina for thermal insulation
- Double-layer steel structure with air cooling
- Vertical Split door design for easy installation of tube
- Separated temperature control unit
|
Processing tube
Note:If remove the feeder and add hi-pressure fitting, the Max. working pressure can be increased to 10 MPa
|
-
Nickel base super-alloy tube with flanges. φ30 OD x φ12 IDX 600 L (mm )
- One mechanical pressure gauge(-0.1-0.3MPa) pre-installed,
- The pre-installed Safety relief valve will turn on automatically once the pressure reaches 0.3Mpa (Pic.1)
- One Ni alloy mesh is installed inside the tube center to carry two layers of materials (Pic. 2 &3)
- A re-feeder connects the tube with a KF25 port on the tube( which is limited pressure to Max. 3 bars)
- Three different materials can be filled in the re-feeder at the same time by filling into different zones. (50ml each zone) via KF25 adaptor
-
|
|
Temperature Controller
|
- 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
- Built-in PID Auto-Tune function with overheating & broken thermocouple protection.
- Over-temperature protection and alarm allow for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- Eurotherm 3000 precision temperature controller is optional with +/- 0.1ºC accuracy
|
|
Dimensions
|
340mm×220mm×1200mm ( L x W x H)
|
|
Net Weight
|
~40 Kg
|
|
Laptop & software (Optional)
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial)
-
Labview Based Temperature Control System (EQ-MTS01)enables the user to edit temperature profiles, manage heat-treatment recipes, record and plot data for MTI furnaces
|
|
Compliance
|
- CE Certified
- NRTL or CSA certification is available at an extra cost
|
|
Warning
|
|
Pic. 1
