HPV-LH is a high-pressure vessel (Autoclave) with a heating jacket, which can reach pressure up to 20 MPa and working temperature up to 200°C. The vessel has a standard 3-liter volume and optional vessels are available with higher volumes.
Note: Upgrade the equipment with safety cover since Sept 2022
SPECIFICATIONS
Pressure Vessel
 
|
- Made of SS316L alloy
- Vessel chamber dimension: There are three option
- ID 12 x H 27 (CM), 3-liter capacity
- ID 15 x H 30 (CM), 5 -liter
- ID 18 x H 40 (CM), 10-liter
- Built-in Pressure relief valve for safety use.
- The pressure gauge, gas inlet, and outlet valve are included for immediate use. The digital pressure gauge is optional at an extra cost, please see the pic on the left.
- Built-in two K-type thermocouples.
The control thermocouple is located outside the vessel.
The monitor thermocouple is located in the middle of the vessel.
- Max. working pressure: 20 MPa (200 Bars, 2900 PSI) within 50 - 200°C
|
Heating Jacket
|
- The vessel is put in a resistance heating jacket with precise temperature control
- Temperature control accuracy: ±1.0 °C
- Please note that the temperature gradient for the internal and external temperature could be as big as 50-200 degrees depending on the media inside
- Power: 208~240VAC, Single-phase, 2KW (for 3 L), 8 KW (for 10L), 50-60 Hz
- Max. working temperature: 200°C
|
| Product Dimension |
- L 500 mm x W 450mm x H 600 mm
|
| Net Weight |
- 80 kg (3 L), 205 kg (10 L)
|
| Magnetic Stirring (optional) |
- Magnetic Stirring and speed controller are optional upon request
|
PC Control (optional) |
-
MTS-01 control softwareis available for controlling and displaying temperature and pressure by PC in the remote distance
- The PC control module is compatible with Labview software
- Pressure & Temp. Real-Time Monitoring (This new feature is available since 5/12/14):
   
|
| Accessories |
- Two Graphite gasket are included, which is consumables
- Please consider tightening the screws for the Reactor with an electric impact torque wrench for ease of tightening, and to avoid overtightening the flange bolts.
- Suitable tightening torque for the Hydrothermal Reactor: 300N/m
|
| Application Notes |
- Warning: For your safety, the high-pressure vessel must be placed inside an explosive-proof box or isolated room during use under high pressure. Never face on top flange without protection to avoid the accident.
|
