The KSL-1200X-M-AD is an automated box furnace with a maximum temperature of 1200, The furnace is operated by a PC and enables one-key automated execution of sintering processes via computer control, including closing the door, raising the temperature, dwelling, and cooling, and opening the door. It can be integrated with a robotic system to facilitate automatic sample loading, unloading, and retrieval. A single PC can control multiple units at the same time.
SPECIFICATIONS:
Furnace Structure
|
- Dual-layer shell structure
- High-purity alumina fiber material furnace chamber
- One laptop computer is included for automatic operation
|
| Power |
- Voltage: AC220V+/- 10% , 50/60 HZ
- Power: 7.5KW
- 3-meter power cable is included without a plug
|
| Heating Chamber |
- 300 x300 x300 ( mm), ( ~ 12x12x12")
- 27 Liter Capacity
- Heating rate: ≤10/min
- Thermal couple: K type
- Uniform zone: 150x150x150 mm in center within +/- 5oC
|
|
Working Temp.
|
- Max. 1200oC < 60 minutes
- Continuous Working Temperature 1100°C
|
| Temperature Control |
- PID automatic temperature control system
- Intelligent 30-stage programmable control
- Temperature control accuracy: ±1. (optional European temperature control accuracy up to ±0.1)
|
| PC operation |
- One PC and pre-installed software are included to achieve automatic operation, including closing the door, raising the temperature, dwelling, and cooling, and opening the door.
- RJ45 communication interface on the side panel, providing MODBUS RTU communication protocol for instrument control and door switch
- One computer can control multiple furnaces simultaneously up to 8 units
- Equipped with φ6.35mm gas inlet (rear) and φ30mm outlet(top) ports which allow the introduction of inert gas into the chamber
|
Automation Collaborative Robot for sample loading
(optional) |
- Full automation with sample loading is optional via the integration with a robot arm.
|
|
Weight
|
~ 200 Kg |
|
Compliance
|
CE certified
NRTL or CSA certification is available upon request |
