KSL-1200X-M-TGA is a desktop muffle furnace (9L) with a precision TGA (thermal gravimetric analysis) function. It is a cost-effective tool to analyze the phase transition of various oxide compounds from 100°C to 1200°C in large quantity samples (1200g max) under air ambient conditions. I also can be used as a conventional box furnace if remove TGA support rod.
SPECIFICATIONS
Furnace Structure
|
- 300 x 300 x 300mm heating chamber with 8L capacity
- High-purity alumina fiber insulation surrounding the chamber provides maximum energy efficiency.
- Heavy duty double layer structure with a cooling fan to keep furnace exteriors safe to touch.
- Double-layer steel case with forced-air cooling to ensure lower safer face temperature.
- One φ30mm venting port is built on top of the furnace
- One φ6mm air inlet is located at one side of the furnace.
|
| Temperature |
- Maximum Temperature: 1200 (≤30min)
- Continuous Working Temperature: 1100
- Recommend Heating Rate: ≤10/min
- Temperature accuracy: +/- 0.1ºC
- Heating element: silicon molybdenum rod
- Thermocouple: B Type
|
Temperature Controller
 
|
- Eurotherm 3000 precision temperature controller with 24-segment programmable
- Over-temperature protection and alarm allow for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- B-type thermocouples
- Software is included and integrated with a force sensor
- One laptop is included as a control panel.
|
Electronic Balance
|
- A precision electronic balance is located at bottom of the heating chamber with a 0.001 g resolution
- The alumina crucible is set on the balance via an alumina rod
- Max. weighting 500 g
- Sample amount: 10 g minimum; 200 g maximum.
- Force Sensor output data will connect to the laptop to show the weight change curve with temperature
- RS485 port and operation software are included
|
Crucibles
|
- One 2000ml alumina crucible is included. Please click Pic. 1 to order more
- You may click Pic. 2 to choose ZrO2, BN, or Y2O3 crucible based on your application
- The customized crucible is available upon request
 Pic. 1  Pic. 2
|
|
Power
|
- 220V Single Phase, 50Hz
- 7500W
- Note: Power cable included but without a plug. Please install a plug on your own according to your country or your lab requirement.
|
|
Warranty
|
-
One-year limited warranty (Consumable parts such as heating elements, processing tubes, and o-rings are not covered by the warranty, please order the replacement at related products below.)
|
|
Compliance
|
- CE Certified
- NRTL or CSA certification is available upon request at extra cost.(please click the marks below to learn details
|
|
Dimension
|
640*560*1000mm (Furnace)
300*360*220mm (Control Box)
|
|
Net Weight
|
~100kg
|
|
Demo Video
|
 |
