• Li-Ion Battery Anode - Single Layer CMS Graphite Coated on Cu Foil (241 L x 200 W x 0.05Thickness, mm) 5 sheets/bag - bc-cf-241-ss-005
1 2

Li-Ion Battery Anode - Single Layer CMS Graphite Coated on Cu Foil (241 L x 200 W x 0.05Thickness, mm) 5 sheets/bag -bccf-ss

Li-Ion Battery Anode - Single Layer CMS Graphite Coated on Cu Foil (241 L x 200 W x 0.05Thickness, mm) 5 sheets/bag -bccf-ss

96 in stock

$149.00 USD
$149.00 USD
Sale Email for Lead Time

SKU: bccf-ss
View full details
This electrode sheet is based on copper foil coated with carbon on a single side and  is used as an anode electrode for Li-Ion battery
5 sheets/bag

Specifications

  • Current collector (substrate): Copper foil, 9 micron
  • Anode material: Composite Graphite
  • Binder: SBR+CMC (2.5% SBR, 1.8% CMC), conductive carbon" Super P, 2.5% 
  • Single-side material density: 60 g/
  • Active Material Proportion in Powder: 93.2%
  • Length: 241mm, Width: 200mm (coating width of 175 mm, left and right-hand side 12.5 mm without coating)
  • Total Thickness: 50 um  (single-side coated)
  • Foil Thickness: 9 um (Volume Destiny: 8.94 g/cm3, and Area Destiny: 8.046 mg/cm2)
  • Specific Capacity: 330 mAh/g {Area Capacity: 1.903 mAh/cm2}
  • Single side coated
  • Qty: 5 Sheets/bag
  • Warning:  Please dry in vacuum oven before using and store it inside the glovebox after opening the package. The recommended temperature and time can be 80-120 °C for 6-12h. 
Click here for SDS for Copper foil
Click here for SDS for Composite Graphite
Click here for SDS for SBR
Click here for SDS for CMC

Click the picture below to view the video on how to coat the electrode and then make a coin cell:
 
×

Manufacturer Part Number: