This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide (NCM622) on a single side and can be used as the cathode of Li-Ion battery -- 5 sheets /bag

SPECIFICATIONS

• Material:  LiNiCoMnO2  6:2:2)
• Current collector (substrate): Aluminum foil (16 microns, area density of 4.22mg/cm2)
• Coated Area: 241mm L x 175mm W. The edge width of blank area is 12.5 mm for each side.  
• Single sides area density: 11 ± 0.20 mg/cm2
• Compaction density: 2.9 ± 0.1 g/cm3
• Coating Thickness: ~38 um
• Total Thickness: ~54 um
• Active Material Weight: 4.52 g
• Active Material Proportion in Powder: 97.5% 
• Specific Capacity: 170 mAh/g [0.1C, 3.0-4.3 V vs Li/Li+, Half Cell] [Electrolyte:1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC]
• Note:  The electrode sheet shall be stored in a vacuum box, a vacuum oven or a glove box to avoid degradation.

•  for NCM
•  for Aluminum

Please click the video below to see how MTI's slitting machine prepares electrode of cylinder batteries

Please click the video below to see how MTI's MSK-T-10 disc and ring cutter to cut electrode sheet