This electrode sheet is based on Aluminum foil coated by lithium iron phosphate in single side and is used as the cathode of Li-Ion battery - 5 sheets /bag
Note: This electrode sheets and its paparameters were updated from Oct. 2023.

SPECIFICATIONS

• Current collector (substrate): Aluminum foil (16 microns)
• Cathode material: lithium ferrous phosphate (coated by carbon)
• Length: 241mm, Width: 175mm ( The edge width of blank area is 12.5 mm for each side)
• Single Side Coating Area Density: 13.5±0.2 mg/cm2
• Compaction Density of Coating: 2.0±0.1g/cm3
• Current Collector Area Density: 4.22 mg/cm2
• Coating thickness: ~68 um
• Total Thickness: ~84 um (after hot calendaring)
• Active Material Weight: 5.43 g
• Active Material Ratio in powder: 95.4% (others are PVDF and conductive carbon)
• Specific Capacity: 150 mAh/g (Area Capacity: 2.025 mAh/cm2); 0.1 C; 2.5-3.7 V;  Electrolyte: 1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC
• Charging and Discharging Curve for the First Cycle
• 
• Rate Testing
• 
• Cycling Test
• 
• Note: Please vacuum heated dry (100oC) before assembling the battery

for aluminum     

 for LiFePO4

Please click the video below to see how        
MTI's slitting machine preparing                      Please click the video below to see how 
the electrode of cylinder batteries                    MTI's MSK-T-10 disc and ring cutter to cut the electrode sheet

                          

                                       

Related Products:

Other Li-ion Battery Electrode

Vacuum Storage Box & Oven

Vacuum Drying/Bake-out Ovens

Coin Cell Assembling

Pouch Cell Assembling

Cylindrical Cell Assembling

Battery Testing