This electrode sheet is based on Aluminum foil coated by lithium-manganese oxide in a single side and is used as the cathode of Li-Ion battery, 5 sheets/bag
Only works for coin cell fabrication. For pouch cell with multiple layers, it is not suitable since no empty metal area for tab formation.

SPECIFICATIONS

• Current collector (substrate): Aluminum foil (16 microns)
• Cathode material: lithium-manganese oxide
  
• Single-side area density: 17.0 ± 0.20mg/cm2
• Compaction density: 2.3 ± 0.1 mg/cm3
• Coated area: 241mm L x 175mm W. The edge width of blank area is 12.5 mm for each side. 
• Coating thickness: ~74 um
• Total Thickness: ~90 um
• Active Material Proportion in Powder(weight ratio): 94 %
• Specific Capacity: 110 mAh/g, 0.1C Charging/Discharging Rate,
• Single side coated
• Qty: 5 sheets/bag

• Warning:  Please dry in vacuum oven before using and store it inside glovebox after open package

•  for LMO
  
•  for Aluminum Foil

Please click the video below to see how MTI's slitting machine preparing electrode of cylinder batteries

Please click the video below to see how MTI's MSK-T-10 disc and ring cutter to cut electrode sheet