This electrode sheet is based on Aluminum foil coated by lithium-cobalt dioxide in double sides and is used as the cathode of Li-Ion battery -- 5 sheets /bag
Only works for coin cell fabrication. For pouch cell with multiple layers, it is not suitable since no empty metal area for tab formation.

SPECIFICATIONS

• Current collector (substrate): Aluminum foil (16 microns)
• Cathode material: lithium-cobalt dioxide
• Double sides area density: 22.8 ± 0.4 mg/cm2
• Compaction density: 4.0 ± 0.1 g/cm3
• Coated area: 241mm L x 175mm W. The edge width of blank area is 12.5 mm for each side.
• Coating thickness: ~57 um
• Total thickness: ~ 73 um
• Active Material Proportion in Powder: 96%
• Specific Capacity: 180 mAh/g, 0.1C Charging/Discharging Rate
• Double side coated
• Qty: 5 sheets/bag
•  for LiCoO2
•  for Aluminum

Please click the video below to see how MTI's slitting machine preparing electrode of cylinder batteries

Please click the video below to see how MTI's MSK-T-10 disc and ring cutter to cut electrode sheet

                           

Related Products:

Other Li-ion Battery Electrode

Vacuum Strage Box & Oven

Vacuum Drying/Bake-out Ovens

Coin Cell Assebling

Pouch Cell Assembling

Cylindral Cell Assembling

Battery Testing