• Lithium Chip 15.6 Dia x 0.25t mm for Li-ion Battery R&D 100g/bottle (4000pcs) - EQ-Lib-LiC25
1 2

Lithium Chip 15.6 Dia x 0.25t mm for Li-ion Battery R&D 100g/bottle (4000pcs) - Lib-LiC25

Lithium Chip 15.6 Dia x 0.25t mm for Li-ion Battery R&D 100g/bottle (4000pcs) - Lib-LiC25

Out of stock

$496.00 USD
$496.00 USD
Sale Email for Lead Time

SKU: EQ-Lib-LiC25
View full details

Lithium chip is widely used for Li-ion and Li metal rechargeable battery R&D, Please click link below to see a paper published in Nature Communication" which use MTI metal foil at the link below

Lithium Chip 15.6 Dia x 0.45t mm for Li-ion Battery R&D 150g/bottle - EQ-Lib-LiC45  

 

SPECIFICATIONS:
Purity
  • 99.9% Lithium
Melting Point
  • 180.5 °C
Density
  • 0.534 g/cm3
Color
  • Silver
Dimension
  • 15.6mm x .25mm (diameter x thickness)
Net Weight
  • 100g/bottle (around 4000pcs/bottle)
Sealing
  • Chip sealed in Al can which is vacuum-sealed in Al bag
Shipping Limitations
  • Shipments of lithium foil are described as “UN 1415, Lithium, 4.3, PG I".  
  • All shipments are Hazard Class 4.3 and require “Dangerous when wet” labels.
  • Sea Class 4.3 (IMDG) 
  • Road, Rail Class 4.3 11a (RID/ADR)
Safety Data Sheet         
Operation
  • Package must be open inside a glove box with Argon Gas and moisture less than 2%RH. May need a screwdriver to help open the AL can, be careful not cutting the gloves.
  • After open the can ,please divided into small package and use a sealed unbreakable bottle/bag for safety Storage.
  • Operation and Storage: Lithium is very active in the air, please carefully read the SDS carefully.
  • Clean the surface of the lithium foil using a nylon brush/stainless steel scalpel until a shiny silvery surface appears (inside an argon glovebox).
Notes
  • MTI only sells Li chip within the USA and does not accept international order due to restrictions on hazard material exportation!!!
  • MTI reserves the right to charge additional handling fee due to special shipping/handling requirement.
  • Lithium Chip may be oxidized during handling and storage.  if you find any oxidation on the surface of Li-chip,  please use sand paper to remove it before using.
  • Chips will have passivation layer, from our customer experience, remove the passivation layer will increase your battery capacity
  • If the Li metal is stored in mineral oil, please refer to this guide on How to clean mineral oil off Lithium metal using anhydrous Toluene
  • The lithium chips were packed in the dry room with <2%RH. Therefore, slight increase of O2 PPM level might be seen in the glove box when the can is opened. Please keep purging the glove box with ultra-high purity Ar until required O2 PPM level is reached.
Video  Video: How to make solid state battery
      

Lithium Storage Options

 

×

Manufacturer Part Number: