MSK-115A-H is a vacuum sealer with multi-functions, including electrolyte injection, vacuum standing (electrolyte diffusion), and vacuum Sealing for large-size pouch cell batteries. This device could be used in a dry room.
SPECIFICATIONS:
Advanced Features
|
- Large or mid-size Pouch cells (EV cells) vacuum sealing, electrolyte injection, vacuum standing three-in-one design
- The electrolyte filler with a speed control console and injection pump for the high-precision dispensing
- Electrolyte injection could be done under different vacuum levels in order to achieve a better electrode immersion
- The built-in liquid electrolyte filtration system and vacuum pump
- Vacuum sealing: high-temperature uniformity and high-consistency sealing performance
- Programmable gas purge function is optional upon request.
|
| Input Power |
- AC 208 - 240 V 50/60 Hz Single phase
- Power: 1.5 KW
- AC 110V single-phase version is available upon request
|
| Working Gas |
- Used in the dry room
- 0.5~0.8 Mpa high purity compressive inert dry gas (Ar is preferred) is required for driving the pneumatic system
- Continues dry inert gas purging for the working chamber is required to maintain a dry atmosphere for electrolyte injection and diffusion
|
| Electrolyte Dispenser |
- An electrolyte plunger metering pump is included for precise electrolyte filling; Injection Accuracy: 3 ‰
- During the electrolyte injection and vacuum standing under the vacuum, The liquid electrolytes would be vaporized. Please consider refilling the electrolyte if necessary
- Electrolyte filling volume and injection rate adjustable via touch screen PLC control
|
| Pouch Size Adaptability |
- Max. L 500 mm * W 350 mm * H 20 mm
- Multi-cell seal up to 500 mm in length ( for example 6 x 80 mm)
-
|
| Vacuum Degassing |
- Vacuum range: -95 ~ 0 kPa adjustable
- Dwell Time: 0 ~ 99 seconds adjustable
|
| Hot Sealing Blade |
- Sealing blade width: 10 mm (standard)
- Customizable up to 15 mm
- Sealing blade length: ≤ 550 mm
|
| Sealing Pressure |
- Maximum sealing pressure: 0.7 MPa (500 kg*f)
|
| Sealing Temperature |
- Two digital temperature controllers on the front panel provide independent control for the left and right heating dies.
- Temperature range: 50 ~ 250 adjustable (accuracy +/- 2 )
- Recommended sealing temperature: 180~190
|
| Sealing Time |
- 0 ~ 99 seconds adjustable (8 ~ 10 seconds is recommended)
|
| Compliance |
- NRTL Certification is available upon request at extra cost
- MTI has granted the patent 201822101349.0 for the Pouch Cell Sealing Machine integrated with Electrolyte Injection MSK-115A-H since December 2019.
|
| Application Notes |
- Please clean the sealing dies after each use. Clean the sealing die after it has cooled down to avoid corrosion by the electrolyte.
- Check the level and smoothness of the sealing die surface regularly. If there is damage to the sealing die, please contact MTI to order a replacement.
- The featured air-tight chamber enables the operation under the Ar atmosphere where lithium sulfur, Lithium Air, Lithium Solid-State, or Li-ion half-cells will be assembled. Please click the images below to understand these technologies and how it fits in a glove box.
|
