1 4

Pouch Cell Case Forming Machine with Automatic Depth Adjustment (Max. L210 * W150 mm) - MSK-120-MV

Pouch Cell Case Forming Machine with Automatic Depth Adjustment (Max. L210 * W150 mm) - MSK-120-MV

Out of stock

Price: RFQ

SKU: MSK-120-MV

Choose your Variant:



View full details
MSK-120-MV is a gas-driven and electrical Aluminum Laminated Films pouch case-forming machine with Automatic Depth Adjustment.
The maximum pouch cell can be punched is L210 * W150 mm (no airbag mode)

SPECIFICATIONS:
Features
  • Gas/Electrical driven.
  • The pouch cell forming depth, punching pressure, and speed are programmable
  • Case forming die set with high strength and precision.
  • Display for case forming time
  • PLC Control
Voltage and Power
  • AC 220V±10%, 50/60 Hz, single phase
  • Maximum power: 1500 W
Customized Die Size
Customer can choose the punching die size within the following types: 
  • Dual Concaves, Folded (with airbag): Max. L105*W120mm (punching airbag width: 20 mm).
  • Single Concave, Folded (with airbag): Max. L120*W120mm (punching airbag width: 20 mm).
  • Single Concave, Four-side sealing (with airbag): Max. L210*W120mm (punching airbag width: 20 mm).
  • Single Concave, Four-side sealing (no airbag): Max. L210*W150mm
Air Pressure Requirement
Max. Cup Depth
  • Maximum 6.0 mm
  • Precision: ± 0.05 mm
Max. Punching Pressure
  • 2.5 T for case forming with servo motor; Case pressing force is up to 15 T (adjustable with pneumatic cylinder)
Production Efficiency
  • ~150-200 pcs/h
Al Laminated Film
Die Installation Warning
  • The tolerance of precision die is very little; Misalignment will result in die damage. 
  • Following the operation manual when installing the die.
  • MTI is not responsible for the damage caused by desperation.

 

×

Dimension

  • 750 mm (L)
  • 600 mm (W)
  • 1780 mm (H) 

Net Weight

  • 900 kg

MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: