MSK-1418-R2R is a roll to roll heavy-duty electric rolling press with 180 mm width x 142mm diameter for the metallic materials, such as Tiny Copper, stainless steel, Nickel alloy, etc.
SPECIFICATIONS:
| Power / AC Converter |
- Input Voltage: 208- 240VAC Three Phase, 50/60Hz
- 5.5KW Three Phase Motor (7.5 horsepower)
|
| Rollers |
- Roller materials: Hardening Cr12MoV
- Roller size: 142 mm dia. x 180 mm width (~ 5.6" Dia x 7" width)
- Hardness: HRC 60-62
- Rolling thickness: 0.02 - 28 mm adjustable
- Gap accuracy: +/- 0.05 mm
|
Rolling Thickness ( Min.)
|
- Min. thickness is dependent on the materials. The below is based on our experience:
- Ag: 0.06 mm
- Au: 0.04 mm
- Sn: 0.02 mm
- Cu: 0.06 mm
|
Rolling Speed
|
- 0 - 18 rpm adjustable via Frequency control with constant output power
- Roll to roll is controlled by synchronous magnetic powder clutch
|
| Lubrication |
- The recirculating oil pump is built-in for lubricating bears and gears
|
Compliance
|
- CE Certified
- NRTL certification is available upon request at the extra cost
|
| Application Note |
- Never roll materials with hardness > 50HRC
- The thickness of each time pressing is depending on material thickness. The harder material shall be less press thickness, which customer shall test by themselves for the best parameters
- For some material which is easy work hardening, you may need to anneal it by furnace after each rolling.
-
Please refer to this instruction on how to calculate rolling pressure from roller gap (reference only)
|
