1 3

Hybrid Film Coater w/ Both Slot Die & Doctor Blade 150 / 200 mm Width - MSK-AFA-HDS-150

Hybrid Film Coater w/ Both Slot Die & Doctor Blade 150 / 200 mm Width - MSK-AFA-HDS-150

Low stock: 1 left

Price: RFQ

SKU: MSKAFAIII-HDS150

Choose your Variant:



View full details

MSK-AFA-III-HDS-150 is an economic hybrid film coater with a vacuum chuck and bottom heater, which can make tape coating and slot-die coating via a special hybrid film applicator up to 320mm L x 100 - 150 mm W from 5 - 100 microns. . It is an excellent tool to research films of perovskite  solar cells, fuel cell proton exchange membrane, and the battery electrodes.

SPECIFICATIONS

Working Power
  • 110 V or 208 - 240V AC selectable
  • 50/60Hz
  • 1000W
Film coater
  • Vacuum chuck made of Aluminum alloy with < 1.0 mm hole
    • Vacuum Chuck Dimensions: 200 mm(W) x 365 mm(L) (8"W x 14"L)
    • The chuck is heated up to 120C by a digital temperature controller with +/- 1ºC accuracy
    • One vacuum pump is required, but not included please order separately.
  • One glass plate is included to coat slurry on a porous substrate, which can be sucked by vacuum chuck
    •  (optional)
  • Moving Speed: One pushing bar is included for moving film applicator at speed of 10 - 100 mm/sec variable
  • Moving Length: 10 - 350 mm adjustable by Adjustable Position Switch
 
Hybrid Coating Head
  • Film coating head consists of one fixed 150 mm width doctor blade and one 100 mm width removable slot die head.
  • The gap between the coating blade and the substrate plate is adjustable with +/- 1-micron accuracy via dual digital micrometers. 
    • Doctor blade: 150 mm width for minimum thickness of 0.010 mm film
    • Slot die: 100 mm width for minimum thickness of 0.005 mm film
    • Click the picture below right to order a spare slot die head with various width
                       		 
 Digital Syringe Pump
  • Digital syringe pump with a easy to use control panel screen is included for slot-die coating
  • Holds small or big syringes up to 200 mL and remembers previous settings on power-up
  • Pumping rate: 1.963μL/min with a 10 μL syringe and 294.524mL/min with a 200mL syringe
  • The movement speed of the plunger: 15cm/min (Max) 0.0001cm/min (Min)
  • Multiple operating modes: Infuse only, Withdraw only, Infuse/Withdraw, Withdraw/Infuse, Continuation
Customer can also consider the economic digital syringe pump 300SP-LD
                   

Options
  • In order to achieve better coating by the slot die, slurry's Viscosity and dispersion are very important. 
  • Please click picture 1 to order the Viscosity meter and dispersing machine (Pic. 1) and find the best parameter for your coating (Pic.1)
  • Two channels heatable syringe pump (Pic. 2)

Pic. 1 Pic. 2
Compliance
  • CE certified
  • NRTL or CSA certification is available upon request at an extra cost

 

×

Dimension:

  • 550mm(L) x 330mm(W) x 150mm(H)

Net Weight:

  • 60 kg

Shipping:

  • Shipping Dimension: 48"(L) x 40"(W) x 37"(H)
  • Shipping Weight: 200 lbs

MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: