MSK-AFA-L1000-HDS is an economic, but precision film coating machine which can coat film with5 microns thickness up to 1100 mm Length. One special hybrid film applicator is included which can do both slots die coating for thin film (< 10 microns) and tape casting for thick film coating (> 10 microns). It is an excellent tool to research film coating for perovskite solar cells, fuel cell proton exchange membrane, and the battery electrode.
SPECIFICATIONS
| Working Power |
- 110 V or 208 - 240V AC selectable
- 50/60Hz
- 100W
|
Hybrid Coating Head
|
- The film coating head consists of one fixed 300 mm width doctor blade and one 200 mm width removable slot die head ( click picture1 below to see detail). The gap between the coating blade and the substrate plate is adjustable with +/- 1-micron accuracy via dual digital micrometers. (Pic. 2)
- Doctor blade: 300 mm width for minimum thickness of 0.010 mm film
- Slot die: 200 mm width for minimum thickness of 0.005 mm film
|
| Syringe Pump
|
- Easy to use 4.25" LCD touch screen (no computer interface)
- Holds syringes from 0.4 mm up to 30 mm in diameter
- Remembers previous settings on power-up
- Pumping rate: 0.1 - 45 mm/min
- Travel range: 0.001 - 120 mm
- Micro speed adjustment: 0.01 - 8 mm/min
- High voltage resistance up to 12 kV
- Precise reproducible flow rates
- Infuses Only. Does not withdraw the syringe
|
| Platform |
- The platform is made of marble
- Width: 350 mm
- Length: 1100 mm
- Surface Flatness: +/- 2 microns
|
| Tavel Speed & Length |
- Travel Speed: 0 - 80mm/sec variable
- Travel distance: 300 mm or 1,000 mm selectable
|
| Coating Thickness |
- The film thickness is dependent on slutty viscosity
- Minimum coated thickness is about 10 micron with +/- 1-micron uniformity by slot die coating at < 2500 mPa·s viscosity
|
Options |
- The top heating is available upon request as the picture 1 below, where the cover is installed on the top for dring film after coating at the extra cost.
- Precision temperature control with +/- 1ºC accuracy
- Max. temperature: 120ºC
- In order to achieve better coating by the slot die, slurry's Viscosity and dispersion is very important, please click picture 2 to order the Viscosity meter and dispersing machine (Pic. 3) and find the best parameter for your coating
-
|
| Compliance |
- CE certified
- NRTL or CSA certification is available upon request at the extra cost
|
Pic 1 
Pic 2 
Pic 3
