MSK-HT-64 is a 16-channel high-throughput automatic crimper for CR2016, CR2025, and CR2032 coin cells. It can process 16 coin cells within 15 minutes with pre-loaded components. The crimping system is controlled by a computer to achieve consistent results for 16 cells per batch and quickly explore the best battery material. The device can be used inside a glovebox and Ar gas compatible.
SPECIFICATIONS:
| Power |
- 110 or 240V AC (50/60Hz) selectable, single phase, 300W total.
- If you use the machine in the Ar gas glovebox, you shall order KF40 feedthrough from us to put the switching power supply in the outside glovebox to avoid arcing burning.
|
|
Operation
|
- One Laptop computer is included, which controls all operations with a dedicated software
- Four pieces of module tray with dimensions 265mm ×232 mm are included. Each tray can pre-load 16 sets of coin cell components, such as case & spring, cathode, separator, anode disc, and cover.
- The manipulator will pick up the component of the coin cell and put it into a crimping die in sequence
- The electric syringe pump will automatically inject electrolytes with +/- 0.001% accuracy.
- The electric crimper will seal the coin cell in the desired pressure
- 16 coin cells will be put back into the tray after being sealed
- Assembling speed: ~120 seconds per cell ( 30 cells/ hr )
- Consistency: > 95%
|
|
Die Set & Compatibility
|
- Assembling die (made of hardening steel) for crimping CR2032, CR2025, & CR2016 coin cells (Optional CR2325, and CR2450 die sets are available upon request).
- The die is consumable. The spare die is available by clicking pic. below to order
|
|
Pressure
|
- Pressure adjustment range: 0 - 1.4 metric tons
- Recommended assembling pressure for CR20XX coin cells should be over 0.8T for MTI's CR2032 cases. Please find the desired pressure by experiment.
|
