MSK-ME-200 is an experimental melt coating system equipped with a heated slot-die coating head. The heads can reach a maximum heating temperature of 350°C for producing polymer or polymer composite films, such as plastic films, and flexible electrolyte membranes for solid-state batteries. It can also be used for coating metal lithium films on copper foil inside a glovebox.
SPECIFICATIONS:
|
Power Supply
|
- 208-240V, 50/60Hz, (single phase)
|
|
Power Consumption
|
|
Heated Coating Heads
|
- Up to 350 Heat able Slot-die Coating
- 150mm width
- ±2um coating thickness uniformity
|
Heating Chamber
|
- Material: Stainless Steel SS316
- Dimensions: ID54mm × height 230mm
- Volume: ~500ml
- Maximum Heating Temperature: 500°C Via external heating coil)
- Temperature Control Accuracy: ±1°C
- Maximum Pressure: 2MPa.
|
Heated Slot Die and Heating plate
|
- One 150 mm width heated slot-die head is connected to the heating container
- Cooling plate is available upon request with water chiller from 5oC - 35 oC
- One 200 x 200 mm heating plate with max. 200 ºC is located at the bottom of the slot die
- The gap between the slot die and the heating plate is adjustable via two-micrometer heads
|
Roll-to-Roll System
|
- Maximum Width: 200mm
- Speed Control Range: 0~800mm/min
- 24V DC motor, suitable for use in an Ar environment inside a glovebox
- Equipped with a 110 - 240 VAC to 24 VDC power adapter
|
| Control Unit |
- The control unit with 7" touchscreen is separated from the device, which will control
- Container temperature and pressure
- Heated plate temperature
- Roll-to-roll speed
|
|
Compliance
|
- CE Certified
- NRTL (UL61010) or CSA certification is available upon request at extra cost
|
