• Large 133L/m Recirculating Water Chiller with 14.5KW Cooling Capacity - MSK-SDA-1005F
1 1

Large 133L/m Recirculating Water Chiller with 14.5KW Cooling Capacity-MSK-SDA-1005F

Large 133L/m Recirculating Water Chiller with 14.5KW Cooling Capacity-MSK-SDA-1005F

Low stock: 1 left

Price: RFQ

SKU: MSKSDA1005F

Choose your Variant:



View full details
MSK-SDA-1005F is a large recirculating chiller designed for the Small Drying Room MSK-ADR-1500EP40-LD, and large induction melders

SPECIFICATIONS 
Power Supply AC 208 -240V; Three-Phase; 60 Hz
Power Input
  • Maximum Power: 5.2 KW
  • Operating current: 16 A Maximum
Cooling Capacity 14.5 KW or 12,470 Kcal/h or 49.5 K BTU
Compressor
  • Rotary Compressor
  • Input Power: 3.75 KW
  • Operating current: 10.8 A
External Recirculating Pump
  • Water Pressure: 20-meter ( 28 PSIG)
  • Water Flow Rate: 8 m^3 / hr; 133 L/min ( 35GPM)
Refrigerant R22
Temperature Control 5 ~ 30 °C
Temperature Accuracy ± 1 °C
Heating Exchanger Aluminum Foil Fin + Copper Pipes + External Rotary Venting Fan
Water Tank
  • 50 Liters made of stainless steel
  • The water chiller should not be connected to a system with a capacity more than the tank's capacity itself.
  • Use coolant instead of water for longer service life.
  • Do not use deionized water as the cooling agent, DI water may cause the copper pipe to corrode, mainly pitting, and leak over time.
Overall Dimensions 1,300 mm (L) x 600 mm (W) x 1,250 mm (H)
Net Weight 220 kg
Compliance
  • CE approval
  • NRTL or CSA is available upon request at extra cost, please contact our sales representatives for a quote. 
Application Notes
  • Must use rust Protection coolants to prevent rust and corrosion. The use of tap water is prohibited.
  • Please connect the chiller water outlet to the equipment water inlet and the chiller water inlet to the equipment outlet. Otherwise, the water flow sensor on the equipment may fail to work due to the wrong water flow direction
×

MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: