• The 24VDC motor allows use in an Ar gas environment with the separated control unit

• Two sets of the milling jars ( nylon & SS ) are included ( total 4 jars)
  • One 80 ml nylon jar with Zirconia milling balls (5 pcs of Φ10mm, 10 pcs of Φ8mm, and 10 pcs of Φ5mm) is included. ( click Pic. 1&2 to order spare )
  • One 80 ml Stainless Steel Jar with SS milling balls (5 pcs of Φ10mm, 10 pcs of Φ8mm, and 10 pcs of Φ5mm) is included. ( Pic. 3 &4)
• Option: High Throughput 4 Milling Cavities SS Mixing Jar is available as an option( click Pic. 5 to order)
• WC, Si3N4, and Zirconia Jars are also available at an extra cost (Pic. 6 - 7 )

Pic. 1  Pic. 2  Pic. 3Pic. 4 Pic. 5Pic. 6 Pic. 7

• Attention: Max. feeding capacity shall be: < 1/3 jar's volume, around 15 g for grinding sample

• Single-phase 110VAC or 240VAC 50/60Hz with the USA plug ( Change switch inside power supply )
• Power consumption: 200 W

• The separated control box for remote operation in a glove box or fume hood.
• ( If using inside the glove box, you need to order KF40 feedthrough at an extra cost)
• Speed control: 0 - 1500 rpm adjustable; operation below 250 rpm may result in strong resonance.
• Time control: 0 - 30 minutes adjustable 
• Five segments programmable via color touch screen for forwarding, backward rotation, and running time

•  The estimated acceleration gravity: ~ 75G

• ≦ 1mm

•  Optional jars and grinding balls are available in the product options bar (click Pic below to order spares )
• For a small amount of milling ( 1- 5 ml), pls use a 4-cavity jar for high-throughput milling (Pic. 2)
• For temperature-sensitive material, a forced are cooling is available at an extra cost ( Pic. 6) to keep temperature 20oC lower

Accessories