MSK-SFM-50L-TE is an automatic pilot scale ternary liquid phase reactor with temperature and pH control. It can be used to prepare the liquid phase from the ternary liquid system for co-precipitation. It is a 50 liters reactor to synthetic uniform ternary system battery powder or complex compounds via the wet method.
SPECIFICATIONS
Features
|
- 50 Liters SS 316 reactor with a mechanical stirring
- Recirculating hot water bath to variate the reactor temperature (R.T. to 90°C)
- Three digital peristaltic pumps deliver different solutions as programmed for pH control
- Automatic pH control via a Mettler pH transmitter.
- 7" color touch screen control panel, which will control pH valve by adding or reducing acid or alkaline flow amount, and set/ record stirring speed, liquid flow rate, flow amount, and temperature
- The reactor can continuously feed and drain the liquids for co-precipitation
|
| Power |
- 208 - 240 VAC, single phase, 50/60 Hz
- Total power: 5,750 W
- A power cable is included without a plug is not included
|
| Reactor |
- Double-layer stainless steel reactor
- Reactor: SS 316; Cooling jacket: SS 304
- Inner dimensions: 50 L Ø400 × 500 mm
- With pH transmitter, temperature sensor, sampling port, and drainage.
- Additional ports: 3 feeding ports, 2 gas inlets & outlets
|
| Temperature Control |
- Thermocouple: PT 100
- Recirculating water bath
- Temperature accuracy: +/- 0.5°C
- Maximum temperature: 90°C
|
| Stirring |
- Stirring blades: SS 316L
- Speed: 0 - 500 rpm
- Adjustable positions of the stirring blades
|
| Peristaltic Pump |
- Rate: 0 - 2.3 L/h
- Accuracy: 2% F.S.
|
pH Sensor
Required device
|
- Need three SS316 50 Liters containers to connect the peristaltic pump to feed liquid into the reactor, which is not included.
- Need one container to connect the reactor to drain the solution, which is not included.
- Please order the SS316 50 liters containers separately
|
| Compliance |
- CE Certified
- NRTL or CSA Certification is available upon request at extra cost
|
