• NIST certificated 0-200,000 Newtons Pressure Calibration Kit: Load cell + Digital Meter - BS-070-200KN-LD
1 1

NIST certificated 0-200,000 Newtons Pressure Calibration Kit: Load cell + Digital Meter - BS-070-200KN-LD

NIST certificated 0-200,000 Newtons Pressure Calibration Kit: Load cell + Digital Meter - BS-070-200KN-LD

Low stock: 1 left

$2,985.00 USD
$2,985.00 USD
Sale Email for Lead Time

SKU: BS070KN200
View full details
    BS-070 is designed to calibrate the crushing tester for UN38.3 and IEC62133. This kit includes a Compression Load Cell and a Digital Strain Gage Panel Meter. The compression load cell can be utilized between 0 to 200kN in compression force. Furthermore, the stainless steel construction ensures long term stability. The Miniature size and low profile allow the users to calibrate another load cell in a limited space or a small chamber.

    The Digital Strain Gage Panel Meter is capable of being indicator or controller of the load cell with 4- digit standard LED display. The scaling capability of the meter also allows displaying all engineering units. The wide DC current input ranges cover typical strain applications. The front panel includes several buttons to program, zero, and record the measurement. 


Load Cell SPECIFICATIONS:

Excitation: 10 Vdc
Output: 2 mV/V nominal
5-Point Calibration: 0%, 50% 100%, 50%, 0%
Linearity: ±0.25% FSO
Hysteresis: ±0.20% FSO
Repeatability: ±0.10% FSO
Zero Balance: ±2% FSO
Deflection: 0.025 to 0.075 mm
Operating Temp Range: -54 to 121°C (-65 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects: Span: ±0.018% of Rdg/°C; Zero: ±0.009% of FSO/°C
Safe Overload: 150% of Capacity
Ultimate Overload: 300% of Capacity
Bridge Resistance: 350 Ohms minimum
Construction: Stainless Steel
Electrical Connection: 1.5 m (5 ft.) Shielded Cable
Operations 
15T Compact Hydraulic Pellet Press for Inside Glove-box Operation - YLJ-15

  •  Could be used to calibration Hydraulic Pellet Press
Gauge Displayed Pressure Value (Bar)
  100 bar
  200 250  300   
  400
Actual Force Applied on the Hydraulic Cylinder (Ton)  3 .8 ton      
  7.7      
  11.5  
  15.4   
Read by Omega load cell (KN) 43 KN 89 107  129  

Digital Strain Gage Panel Meter Specification:

Input Ranges 0-100 mV, ±50 mV, 0-10 V, ±5 V, 0-20 mA, 4-20 mA
Isolation Dielectric strength to 2500V transient per 3mm spacing based on EN 61010 for 260Vrms or DC working voltage
Input Protection Voltage Input = 120 Vrms max; Current Input = 100 mA max
Input Impedance 100 Meg ohms for 100 mV or ±50 mV input range; 1 Meg ohm for 10 V or ±5 V input range; 5 ohms for 20 mA current input range
Display 4-digit, LED 9-segment, 21 mm (0.83")
Analog-to-digital technique Dual slope
Internal resolution 15 bits
Read rate 3/sec
Polarity Automatic
Max error process  ±0.03% of reading, ±1 count
Span tempco 50 ppm/°C
Step response 1 sec
Warm-up to rated accuracy 30 min
Load Regulation 1.1%
Line Regulation 0.02% per Vac
Analog output (optional) 0-10 V, 4-20 mA or 0-20 mA; may be assigned to a display range or to setpoint #1, when used as a proportional control output
Operating temperature 0 to 50°C (32 to 122°F)
Storage temperature -40 to 85°C (-40 to 184°F)
Relative humidity 90% at 40°C (104°F) (non-condensing)
Panel cutout 1/8 DIN, 45 x 92 mm (1.78" x 3.62")
Weight 575 g (1.27 lb)
AC Power Unit Power: 115 Vac or 230 Vac ±10%; 50-60 Hz, 11.5 watts max.
Excitation: 24 V @ 25 mA or 12 V @ 50 mA or 10 V @ 120 mA or 5 V @ 60 mA
DC Power Unit Power: 10-32 Vdc; 7.5 watts max.
Excitation: 24 V @ 25 mA or 12 V, 10 V, 5 V @ 35 mA (For Low/Medium Brightness)
Certification CE Certification  
UL Certified
Operation Manual
×

Manufacturer Part Number: