OTF1200X-M-H is a short Split furnace module that can accept processing tubes from 3" - 5" in diameter (Tube is not included) for DIY or customized furnace. Also can be used for replacing Vacuum Heated Pressing Furnace up to 1100ºC with 4" Quartz Tube and Water Cold Flange-OTF-1200X-VHP4

Specification:

• Power Requirement: AC208-240V. single phase, 2500W Max.
• Fibrous Al2O3 liner for 3" - 5" diameter tube
• splittable steel casing with high-temperature plastic painting
• Heating elements is installed inside the liner with 1100C Max. working temperature
• Heating Zone Length: 12" (300mm)
• Accept processing tube and flange (not included) from 3" to 5" diameter, length to be less than 600 mm (Please order tube adaptor and thermal block separately)
• One K-Type thermocouple is included
• Two wires from the module: Power Cable to connect AC output from the controller and K-type thermocouple to connect the controller
• Please click the picture below to order the temperature controller (please choose AC220V temperature controller only)
• Dimensions: