| Power Input |
9KW |
| Working Voltage |
AC220V Single-phase 50/60Hz ( 50 A breaker required) |
| Max. Working Temperature |
1500°C < 1 hours |
| Continuously Working Temperature |
1400°C
|
| Recommend Heating rate |
5°C/min |
Processing Tube
|
Tube material: Alumina Tube
Size: 80 OD × 74 ID × 1200 L mm
Optional tube material: Mullite tube
Size: 82 O.D x 73 I.D x 1200mm L
|
| Heat Zone Length |
- Three heating zones: 200 mm / each (Included 20 mm spacing)
- Total heating zone length: 600 mm
- Constant Temperature Zone length: 350mm (If set 3 zone at same temperature) +/- 2ºC.
- Accept processing tube up to 100 mm diameter
|
Temp. Profile at 1450ºC
84mm O.D Tube |
 (click to enlarge) |
| Overall Dimensions |
915 mm × 660 mmW × 762 mmH |
Temperature Controllers
 
|
- PID automatic control with 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
- Built-in overheating & broken thermocouple protection.
- Over-temperature protection and alarm allow for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- Three S-type thermocouples (one for each zone).
- RS485 Communications Port.
- Optional:
- The furnace may be operated by PC by installing a control module. Please order an MTS-02 control module at extra cost.
- If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you to order a computer laptop from us to avoid software installation problems. For more information please click here.
  
|
European Temperature Controllers (optional upgrade)
 |
- 1 heating channel
- 1 program of 8 or 24 segment
- Alarm Relay: Form 'A' and Form ‘C’ built-in
- Digital Communications: RS485
- Temperature Accuracy: ± 0.1ºC
- Recipes: Using a PC tool recipes can be created that can be used to change the operating parameters of the 3000 simply by selecting a new recipe via the HMI. This is very useful where multiple products are processed using the same controller but require different parameters to be set.
|
Laptop, software & WiFi Control(Optional)
 
|
- Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial)
- Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, record and plot data for MTI furnaces.
- A wireless remote control provides up to 300 meters of operating range.
- The above features are available upon request at an extra cost (up to $1,000).
|
| Vacuum Level |
- 10E-2 torr by quality mechanical vacuum pump
- 10-5 torr by molecular pump
|
Thermal Block Placement |
-
Two thermal blacks are included. Please click the picture below to learn how to place them inside tube
- You may order flange support to avoid tube rotating ( click Pic below right )
 
|
Heating Elements & Thermal couples
|
- 24 pcs 1500ºC grade Silicon carbide rod (14mm Dia. x 150mm heating x 413mm length)
- The heating element is consumable, Please click the picture below to order spare and replacement.
- 3 pcs S type thermal couple built-in
|
| Dimension & Net Weight |
 860 L x 540 W x 750 H (mm) Weight: 160 Kg
|
| Shipping Weight & Dimensions |
465 lbs; 52" x 40" x 46" |
Application Notes |
- The tube furnaces with mullite tubes are designed for use under vacuum and low pressure < 0.02 Mpa
- Never use the graphite crucible and the alumina tube.
- Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.
- The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
-
Vacuum pressures may only be safely used up to 1300°C for all mullite tube furnaces:
- Customized long heating zone up to 1200 mm L with 700 mm uniform temperature zone ( +/- 5°C) , and 1800mm mullite tube is available upon request; ( click the picture below to see sketch)
 5 zones   6 zones
|
| Operation Instructions |
 |
Warranty
|
- One-year limited warranty with lifetime support (consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.).
- ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty.
|
Compliance |
- CE Certified
- NRTL (UL61010) or CSA certification is available upon request at extra cost.
|
