This is a macro TGA tube furnace up to 1600°C function. Compared with conventional TGA devices, the TGA furnace can load larger samples up to 100 g to get a more accurate result for industry and can be operated under both a vacuum and controlled gas atmosphere, even under hydrogen gas to research phase transition during material processing. The TGA furnace also may connect a gas analysis device to study gas composition change during heating and weight change.
SPECIFICATIONS
Furnace Structure
|
- Using one of the MTI split tube furnaces with 1600oC working temperature via MoSi2 heating elements.
- Heating zone length 390 mm with 135 mm constant temperature zone within +/- 1
- The temperature range is optional from 1200 to 1600 with +/- 0.1 accuracy
- Precision electronic balance with 0.001 g resolution.
- The vacuum level can reach 10-5 torr via turbopump
|
|
Working Temperature
|
-
900 - 1600 under oxygen & inert gas atmosphere ( PSIG 0.1 > 3 )
- 900oC - 1500oC under vacuum
|
|
Power
|
- 208 - 240CAC, single phase, 50 / 60 Hz
- 6KW
- Power cable 3 meters included, without plug
|
|
Tube Size and Materials
|
- High-purity alumina tube with a dimension of OD60x ID54x L1200 (mm)
-
|
Force Sensor
|
- High precision force sensor with 0.05% accuracy
- Resolution: 1 mg
- Sample amount: 1 g minimum; 100 g maximum. ( based on Fe powder )
- Force Sensor output data will connect to PLC or PC to show the weight change curve with temperature
|
Crucibles
|
- Five alumina crucibles are included with 36 ml capacity ( OD40xID35xH40mm)
- Please click Pic. 1 to order more
|
|
Temperature Controllers
|
- Programmable temperature controller Europe there for precise control of heating rate, cooling rate and dwell time.
- Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection.
- Over-temperature protection and alarm allow for operation without attendant(s).
- +/- 0.1 ºC temperature accuracy.
- One K-type thermocouple.
- RS485 Communications Port.
-
One brand new laptop with pre-installed software is included
- Spare MoSi2 heating elements (470mm L) are available at extra cost.
|
|
Vacuum
|
- A KF40 vacuum port is built-in to connect a vacuum pump
- The achievable vacuum level depends on the selected vacuum pump
- Click the Picture below to order a vacuum pump separately
|
|
Gas Delivery optional
|
- 1/4" gas inlet and out are built-in with an optional mass flow controller. The recommended gas flow rate is <200 sccm.
- You may connect the TGA furnace with the MTI multi-channel gas delivery system for mixing gas operation, or oxygen or a gas analyzer to the gas outlet port
|
|
Warranty
|
-
One-year limited warranty (Consumable parts such as heating elements, processing tubes, and o-rings are not covered by the warranty, please order the replacement at related products below.)
|
|
Compliance
|
- CE Certified
- NRTL or CSA certification is available upon request at extra cost.(please click the marks below to learn details
|
|
Dimension
|
H: 1850mm L:1450mm W: 800mm
|
|
Reference Video
|
|
