1 5

800℃ Rapid Melting and Quenching Furnace From Liquid Phase to Ga Melt-QF-800

800℃ Rapid Melting and Quenching Furnace From Liquid Phase to Ga Melt-QF-800

Out of stock

Price: RFQ

SKU: QF-800

Choose your Variant:



View full details

QF-800 is a fast melting & quenching furnace under an air-tight chamber for studying super-cooling of materials

SPECIFICATIONS

Power
  • AC 110VAC, Single Phase, 50/60 Hz
  • 1.5 KW ( without vacuum pump )
  • The power cable is included with a US plug
 Vacuum chamber & Hater
  • SS304 Vacuum Chamber: Ø315 mm×315 mm H (inner dimension)
  • Resistance coil heater up to 800ºC
  • 14 mm ID quartz tube with 1 mm hole as melting crucible
  • 10 bar pressure inert gas ( helium suggested ) will inject molten materials into a bottom container with liquid gallium.
 Heating plate
 
 
  • One heating plate with magnetic stirring for liquid gallium is located at the bottom of the heater up to 200oC
  • Melting liquid will be dropped into the heated container with Ga for rapid cooling

Max. Temperature
  • 800oC < 30 min
  • Heated by resistance coil

Heating Rate

Recommended: <= 30oC /min

Quartz tube
 
  • Two 14 mm ID quartz tubes with a 1 mm hole are included.
  • Click the picture left to see the dimensions of the tube, and order a spare
Control Panel
 
  • Furnace temperature control:
    • Digital temperature Controller with 30 segment programmable process segments up to 800oC
    • PID automatic temperature control system
    • DB9 PC communication port and software are included for PC operation.
    • +/- 1 ºC temperature accuracy
  • Heating Plate Temperature Control
  • 250oC Max with magnetic stirring

Vacuum Level
  • Mechanical Pump (Separate Purchase): < 1e-2 torr 
  • Molecular Pump (Separate Purchase): <1e-5 torr
                                   
×

Dimension

  •  L650 mm x W670 mm x H1600 mm
  • Weight:  ~ 250 kg

MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: