1 6

Ultrafast Heating & Pressing Furnace (UHP) up to 2900°C &500 kgf with Ultra High Vacuum - RTP-MS

Ultrafast Heating & Pressing Furnace (UHP) up to 2900°C &500 kgf with Ultra High Vacuum - RTP-MS

Out of stock

Price: RFQ

SKU: RTP-MS

Choose your Variant:



View full details
RTP-MS is an Ultrafast Heating Pressing Furnace ( UHP) ) with a heating speed of more than 200oC/minute up to 2900°C and Max. 500 kg Load inside an ultra-high vacuum chamber made of stainless settle. The furnace may replace SPS for small sample at a low cost.


SPECIFICATIONS:

Furnace Feature
  • Stainless steel vacuum chamber with a water-cooling jacket that enables it to reach 10-7 torr
  • Two types of graphite die and the crucible are included for pressing pellets up to 2900oC @ 50 MPa, and sintering powder or sheet at 2900oC without pressure.
  • The digital load cell is built to control loading pressure
  • The IR temperature sensor is included for digital temperature control
Furnace Power
  • Input power: 208 - 240 VAC, 50/60Hz, single phase, 18 KW
  • Output: 20VAC and Max. 800A
Graphite Heater
  • Two sets of 2" graphite heaters are included, as shown in picture left
    • Pellet die heater: 10 mm ID, 60 MPa
    • Crucible type heater: 33 mm ID with lid
  • The customized heater is available upon request
Working Temperature
  • Max. working Temperature: 2900°C Max.
  • Max. working time: 120 minutes Max.
  • Max. Heating Rate: 200oC/ Second
Pressing Pressure
  • A movable rod with Vacuum sealed is installed on the top flange of the vacuum chamber
    • Pushing rod travel distance: 60 mm
    • Two ceramic plates will be pressed on the graphite heater
    • An electric motor-driven top rod to apply pressure to graphite pellet die with a precision load sensor
    • Max. loading force is 500 Kg with accuracy+/- 0.5 kg
    Temperature Control
    • A digital IR temperature sensor made in Germany is built in with a laser point
      • (1) Manual heating with IR temperature display to achieve max heating rate ( ~ 200oC/S)
      • (2) Programmable temperature control by IR sensor and digital display
    • Eurotherm 3000 temperature controller provides a 24-segment program and +/- 1oC accuracy
    Vacuum chamber
    • The vacuum chamber is made of SS304 with dimensions of φ345 x L380mm
    • The vacuum chamber is built by a double layer for water cooling
    • 138 mm diameter quartz window is installed on the front of the door for observation
    • KF 40 vacuum port to connect to a vacuum pump
    • 1/4" gas inlet and outlet with valve is installed
    • The digital vacuum gauge is included, and the vacuum pump requires separate purchase
    • Vacuum level： 10-2 torr by mechanical pump and 10-5 by compact turbopump, as well as 10 -7 torr by larger turbopump
    Recirculating Water Chiller
    Compliance
    • CE Certified
    • NRTL or CSA certification is available at extra cost.
    Upgraded Option

    		 This furnace can be upgraded to an automatically version with sample loading and unloading via a robotic arm.

     

    ×

    Dimension

    • Main Body: 1000mm（L）*710mm（W）*1900mm（H）
    • Water Chiller: 660mm (L) x 765mm (D) x 1230mm (H)
    • Vacuum Regulation System(Separate Purchase) : 1000mm（L）*600mm（W）*1580mm（H）

    Weight:

    • Main Body: 400kg
    • Water Chiller: 165kg

    MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

    The MTI One Year Limited Warranty does NOT cover

    • Consumable parts such as O-rings, crucibles, screws, washers, etc.
    • Any damage and rust resulting from improper storage or maintenance.
    • Any damages caused by the use of corrosive and acidic gases.
    • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
    Manufacturer Part Number: