EQ-SPC-2030-RR is a lab scale automatic screen printing system which consists of four parts, e.g. roll to roll mechanism, screen printing, Infrared drying oven, and printing speed control. Max printing area for each sheet is 200W x 300L (mm). It is an excellent tool for preparing flexible battery, fuel cell, OLED or electronic device.
Specifications:
| Features |
- Compact design with PLC touch screen control
- Roll to roll printing via Intermittent movement
- Max. area for printing sheet: 200 Width x 300 Length for each sheet
- Infrared drying oven up to 150ºC
- Good for the pilot line of the flexible electronic device
|
| Working Voltage |
- 208 - 240V Single Phase, 50/60Hz
- 5500 W total
|
| Screen Printing Mechanism |
- Max. screen frame dimension: 230mm (W) x 380mm (L)
- Max. printing area for each sheet: 200mm (W) x 300mm (L)
- Scraper speed: 0 - 20 time / min
- The accuracy of the position: ± 0.1mm
- The requirement for slurry viscosity: 5 - 100000 cps
- Slurry adding method: Manually
|
| Roll to Roll Mechanism |
- Roll to roll movement by tension control
- Moving speed: 0.1 - 7 m/min adjustable
- Winding roller size: 38mm Dia. x 200mm (W)
- Substrate width: 5 - 200 mm
- Printing Width: 5 - 195 mm
|
| Drying Oven |
- Infrared heating up to 150ºC Max.
- Oven length: 600oC
- Temperature accuracy: ± 5
|
PLC Control
|
- Printing method: Roll to roll via Intermittent movement
- PLC control includes:
- Substrate moving speed
- Intermittent running times
- Intermittent running length
|
| Compliance |
- CE certified
- NRTL or CSA certification is available upon request at an extra cost
|
Compressed Gas
|
- The compressed air pump is required for operation
- 0.5 - 0.6 MPa pressure required
- A compressed Air pump is not included, please click the picture in the left to order if you don't have one
|
