EQ-SPC-3050 is a benchtop precision screen printing machine driven by compressed gas with a coating area of 300 mm x 500 mm. It is a cost-effective tool for making various film coating with patterns and can be used for making flexible rechargeable battery electrodes, OLED, or thermoelectric devices.
(Since August 25, 2022, added protective shield option for extra safety measures)
Specifications:
Features
|
- Two types of operation mode: foot pedal and automatic
- Digital display to count printing number
- Vacuum chuck for holding the printing sheet faster and easier
- The printing knife is driven b compressed gas with constant pressure to ensure repeatable quality printing
- Printing length, width, and blade angle are adjustable for quality printing
|
| Working Voltage |
- 208 - 240V Single Phase, 50/60Hz
- For 110V, a 100W Transformer can be purchased separately
|
Substrate Holder
|
- A substrate is held by the vacuum chuck with an area of 300 x 500 mm
- The vacuum pump is built into the bottom of the machine
- Effective printing area: 280 x 350 mm Max.
- Substrate thickness: 0 - 80 mm adjustable
- The position of the vacuum chuck can be fine adjusted with the knobs.
- Position adjusting range:
- X-axis: 10mm to the left and 10mm to the right, total of 20mm
- Y-axis: 8mm to the front and 8mm to the back, total of 16mm
|
Screen Mask
|
- A sample screen mask with MTI's Logo is included for testing and machine inspection.
- Extra screen masks with frames are available from Amazon or many other online stores.
- A screen mask with a customized printing pattern can be DIY, please refer to this video.
- MTI can also provide screen masks with customized printing patterns and sizes, please contact us for more detail.
|
Screen Mask Holder
|
- Holds Screen Mask within the below range:
- Length: 300 - 600mm
- Width: 200 - 350mm
- The Y-axis position is adjustable via a lead screw.
- Adjustable range: 30mm inward and 30mm outward, a total of 60mm.
|
Coating Blade
|
- Two Squeegee Holders are included with a coating width of 170mm and 250mm.
- Two Squeegee with a width of 170mm and 250mm are also included for immediate use.
- The backing blade is used for returning the printing material to achieve automatic continuous printing.
|
| Position Accuracy |
|
Protective Shield (Optional )
|
- The screen printing machine is installed with a transparent protective shield and an interlock is available to select on the options bar.
|
| Compliance |
- CE certified
- NRTL or CSA certification is available upon request at an extra cost.
|
|
Compressed Gas Requirement
pic1
pic2
|
- The compressed air pump is required for the operation
- 0.5-0.6 MPa pressure required
- The compressed Air pump is not included, please click the link below to order one if you don't have
- Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn about the installation of a gas regulator.
|
