OTF-1150X-III-Ni100 is a customized ultra-high vacuum tube furnace up to 10-6 torr and 1150oC Max. working temperature. The processing tube is made of Ni-based super-alloy with 100 mm ID x 110mm OD x1400 mm L. Furnace is 3 zone heating with 600 mm heating length with large turbopump and water cold flange
Specifications
Furnace 
|
- Three-zone heating: each zone length 300 mm, a total of 900 mm heating length
- Alumina fibrous thermal insulation
- Double-layer steel casing with air cooling to keep the outside case temperature lower than 60oC
- Kanthel Ni-Cr-Al resistance elements.
- Please click the picture left to see the detailed specification of furnace
|
Temperature Controller 
|
- Three Eurotherm 300 digital temperature controllers are built-in to control each heating zone independently.
- 24 segment programmable with +/- 0.1ºC accuracy.
- RS485 port and software are included for PC operation.
- Please click the picture left to see the detailed specification of the controller
|
|
Processing Tube
|
- The processing tube is made of Ni-based superalloy ( Inconel equivalent )
- Tube dimension: 100 ID x 110 OD x 1400mm L
- CF type of flanges is built-in the two ends of the tube
- Max. working temperature: 1150ºC under high vacuum
- Max. Vacuum level: 10E-6 torr
|
Vacuum Pump 
|
- 700L/S high-speed turbopump station
- CF160 port connects to the tube flange via a manual gate valve.
- Pressure gauge and the digital display is included
- Please click the picture left to see the detailed specification of the turbopump
- If you prefer the diffusion pump to reduce the cost, please let us know
|
|
Power
|
- 208 - 240VAC, single phase, 50/60 Hz
- < 10 KW
- 50A air breaker required
- 380VAC, 3 phases, 50/60Hz is available at the extra cost
|
|
Compliance & Warranty
|
- CE certified
- NRTL or CSA certification s available upon request at the extra cost
- One year limited warranty
|
