VTC-W200 is an economic vacuum wire melt spinning system for the research lab to prepare amorphous metallic wire < 20-micron diameter via induction heating and rapid quenching on a specially designed spinning copper wheel.
SPECIFICATIONS:
Features
|
- The system consists of the vacuum chamber and induction heating with a spinning wheel with max. 70 meter /sec. spinning speed
- Can melt metallic sample around 10 - 50 g per batch. up to 2000oC.
- Customer can use own vacuum pump and water chiller to save cost
|
| Power Requirements |
- Input Voltage: 208 - 240V AC, Three Phases
- Input Power: 20 KW ( 70A breaker required)
|
Vacuum Chamber
&
Vacuum pump |
- Vacuum chamber: 400 mm diameter x 350 mm L
- Hinged type door with quartz glass observation window
- KF40 port to connect to a vacuum pump
- Can achieve 5 x10 E-5 torrs by a turbopump
- A 2-meter long quench tube is included to receive spun wire
|
Induction Heater
|
- Dual Station 15KW Induction Heater
- Frequency: 30 - 80 kHz
- Crucible: 15×50mm made of BN
- Max. sample load: around 2 - 5 g ( Fe)
|
Spinning wheel
|
- Flying wheel made of Oxygen Free Copper
- Dimension φ220 × 30mm
- 0 - 70 meter / second adjustable
|
Wire ( silk) diameter
|
- Wire (silk) diameter is dependable on material and dipping depth
- For Fe base alloy usually can achieve < 100-micron diameter
- FeSiBNbCu alloy amorphous wire in about 50-micron diameter
|
| Optional Facility |
- Water chiller > 58 L/min is required ( click Pic. 1 to order or use your own )
- A vacuum pump is required. ( click Pic. 2 and 3 to order or using your own pump with KF 40 Port )
|
| Compliance |
- CE Certified
- NRTL certification is available upon request at an extra cost
|
Pic. 1 
Pic. 2
Pic. 3