YLJ-100E is an motorized hydraulic pressing machine up to 100 metric tons for preparing compound or ceramic samples faster and easier. YLJ-100E has a built-in motorized hydraulic pump which is driven by an motorized oil pump with a digital pressure display. It is an excellent tool for material/ceramic/chemistry laboratories to make a larger pellet sample.
SPECIFICATIONS:
Pressure
|
- Max. 100 Metric Tons ( 980 KN)
- Digital pressure display (unit KN)
- 10 - 100T adjusted by manual ON/OFF valve
- Display real pressure on the sample based on die size
- Pressure accuracy: +/- 1% by adjusting hydraulic oil valve
- Max. force 1030 KN release protection
- The mini printer is built-in to calculate the pressure per sample area
|
| Pressure Controller |
- Digital control panel to set up sample diameter and display real force.
- The mini printer is built to displace real pressure
|
| Electric Hydraulic Pump |
|
| Bottom Hydraulic Cylinder Travel Distance |
- 0 - 20 mm
- Range sensing switch to prevent travel distance beyond 20 mm
|
| Top Support Screw |
- 310 mm Max ( adjustable )
|
Working Space
|
- Max opening: 250 L x 300 W x 300 H, mm
- Diameter of top & bottom platform: 300 mm
|
| Press Cover |
- A metal door with a magnetic door latch
- Note: For safety, please close the door before operating
|
| Application Notes |
- Check the Oil Level Regularly. Add AW 46 Hydraulic Oil if the Oil Level is low
- Do not raise the bottom cylinder (piston) more than it's maximum traveling distance (20 mm)
- Warning: Customers must always wear protective goggles during operation !!!
- Please shut the oil release valve and oil drain for transportation or long term idle
- Operating the pressor inside the glove box is not recommended
|
Compliance
|
- CE Certified
- NRTL (UL or CSA) Certification is available upon request at an extra cost ( Isolation transformer will add on)
|
Pellet Press Dies (optional) &CIP die
|
|
Pic. 1 
Pic. 2