YLJ-HP2-H is an ecnomic hydraulic press with 12mm I.D. Silicon Nitride Pellet Pressing Die, Heating jacket (550°C Max.) and Single Setpoint Temperature Controller. It is a ready-to-go product package for pressing ceramic, polymer, or ceramic-polymer composite materials. Applications include microwave dielectric materials, solid-state electrolyte, and semiconductor. The compact design of the press makes it well-suited for inside glove box operation with an inert gas environment (Argon compatible).

SPECIFICATIONS: 

Power	Heatable Die Set: AC 220V 50/60Hz, 550 W Max(for 110V, please order a 750W transformer)
Working Temperature & Load	Temperature: RT - 550 ºC Max Load:  1.6 metric ton @ RT - 550 ºC ( limited by Si3N4 die sytength ) ( Hydraulic press can reach 10 mitric ton ) Convert Force applied to the die to Gauge reading of hydraulic pressure. Notice: This hydraulic pressure is not equal to the actual pressure applied on the pressing rod. Gauge Displayed Pressure Value (Mpa) 3 5 6 7.5 8 Force Applied on the Hydraulic Cylinder (Ton) 0.5 1 1.25 1.5 1.6 Notes: For calculating the actual pressure (MPa) applied on your working piece, please follow the equations in below: P = T x g x 10/ (πr^2) P: pressure (MPa) applied on your working piece T: force (Ton) applied on the Hydraulic Cylinder  g: standard gravity. g ≈ 9.8 m/s2 π: ~3.14 r: radius (cm) of the working piece 1 metric Ton = 1000 kg
Heatable Die Structure	The SiN Heatable Die Set EQ-HC-SiN includes: A set of 12mm I.D. Silicon Nitride Pellet Pressing Die - Die-12-SiN Pressing die sleeve: 30mm O.D. x 12mm I.D. x 40mm H Upper Pushing Rod: 12mm Dia. x 40mm H Lower Rod: 12mm Dia. x 10mm H Mold Release Rod Mold Release Sleeve Upper and Lower Supporting Plate Heat Insulation Plate with mica Heating Jacket: 65mm O.D. x 40mm H Copper Adapter: 39mm O.D. x 30mm I.D. x 40mm H Single Point Temperature Controller
Pressing Control	Economic Hydraulic Lab Press with Safety Cover - YLJ-5-H A dial gauge 0 - 100 MPa for hydraulic pressure indication 320 mm (L) x 400 mm (D) x 290mm (H) Die holding plate width: 125 mm Max die height: 135 mm
Temperature Control	Single Point PID temperature controller with a built-in type-K thermocouple. Temperature Accuracy: +/- 2°C The temperature control upgrade is NOT available for this equipment. Please purchase YLJ-HP2.
Glovebox Feasibility	This entire product can be operated inside an Argon Glovebox. If feedthrough is needed, please contact MTI for specific solutions.
Instruction Video