YLJ-SPS-1200 is a low-temperature & low-cost SPS furnace with up to 1200 °C and 100 MPa Pressure. It is designed to press a 6 - 12.7 mm diameter pellet for most battery, thermal, electric, and metallic materials.
SPECIFICATIONS:
|
Furnace Power
|
- 208 - 240 VAC, 50/60Hz, single phase
- 10 kW
|
|
Pressure & Pressing Die
|
- Precision servo motor to apply load to the graphite die up to 2000 Kgf
- PID control pressure to provide constant pressure with +/- 0.5 Kg accuracy
- One graphite die with an ID of 12.75 mm is included. Customized die is available upon request
- Max.. pressure of graphite die: 100 MPa
|
|
Vacuum Chamber
|
- The vacuum chamber is made of stainless steel
- Vacuum Chamber: Ø315 mm × 315 mm H (inner dimension)
- One Ø120 mm quartz observation window.
- One KF25 and one KF40 vacuum port are built at the back of the chamber
- DN160 ISO-K port is built on the left of the chamber for connection of a turbopump
- Two KF16 and a KF25 port on the top of the chamber for a vacuum meter or other devices
- The vacuum pump is available upon request
|
Temperature Control 
|
- Resistance heating at 10VAC up to 1000A
- K-type thermal couple
- Max.. working temperature: 1200 °C
- Max. Heating Rate: 200 °C/ minute
- 30-segment programmable temperature controller with +/- 1oC accuracy
- Touch screen panel to control both temperature and vacuum level, and atmospheric pressure
- RS-485 port and software are included for PC operation and recording temperature and pressure profile
|
Water Chiller 
|
|
|
Optional:
|
|
|
Compliance
|
- CE Certified
- NRTL or CSA certification is available at extra cost.
|
