1 5

200MPa Vessel CIP Die Set (110 mm ID) for Cold Isostatic Press - CIP110D200

200MPa Vessel CIP Die Set (110 mm ID) for Cold Isostatic Press - CIP110D200

Out of stock

Price: RFQ

SKU: CIP110D200

Choose your Variant:



View full details
CIP110D200 is a CIP die set (Max. 200 MPa) for cold isostatic press with a 110 mm ID x 125 mm depth chamber. It is an excellent tool for preparing a Max. 4" dia. sample with a much higher density.

Specifications:
CIP Camber Size 110 mm ID x 125 mm Depth
Vessel Pressure
  • 0 - 200 MPa
  • 1 MPa / 5 min
Actual Force Applied on the Hydraulic Cylinder (Ton) 95 190
CIP Die Pressure (Mpa) 100 200
Compatible Press
200T Electric Hydraulic Press
Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order). Check this link to understand liquid rubber for sample preparation.
  • You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order)
  • You may use the machine as a dry pressing to order pressing die (click Pic below right)
  • Pic. 1  Pic. 2 Pic. 3
Warning
  • Never let the press hold the target pressure be longer than 8 minutes
  • Normally, the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve have been tightened before pressing

 

×

MTI offers a One-Year limited warranty with lifetime support(may cause a fee) for this product.

The MTI One Year Limited Warranty does NOT cover

  • Consumable parts such as O-rings, crucibles, screws, washers, etc.
  • Any damage and rust resulting from improper storage or maintenance.
  • Any damages caused by the use of corrosive and acidic gases.
  • Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.
Manufacturer Part Number: