Hydraulic Crimper for All Types of Coin Cells with 100 Pcs CR2032 Case

1 7

Hydraulic Crimper for All Types of Coin Cells with 100 Pcs CR2032 Case - MSK-110

Minimum Order: $20 (equipment), $100 (crystals)

Shipping and handling will be applied

35 in stock

$2,359.00 USD

Sale Email for Lead Time

SKU: : \MSK110

Product variants

Quantity

Add-Ons

MSK-110 Series Crimping or Dis-assembling Die S...

$798.00

CR2032 Coin Cell Cases (20mm Dia. x 3.2mm) with...

$195.00

Stainless Steel Spacer for CR20XX Cell (15.5mm ...

$59.00

Stainless Steel Wave Spring for CR2032 Case wit...

$69.00

19 mm Dia. Polypropylene (PP) Disk as Battery S...

$88.00

Electrolyte LiPF6 for Lithium-ion Battery, EC:D...

$298.00

CR2032 Coin Cell Kit: Case + Spacer + Separator...

$199.00

View full details

MSK-110 is a lighter-weight coin cell crimper with a smaller footprint. The crimper is suitable for sealing various types of coin cells such as CR2032, CR2025, and CR2016 with an included die. It can also crimp CR2325, CR2450, AG3, AG5, and other special-size cases with optional die sets. 100 pairs of CR2032 cells are included for immediate use

MTI has granted the patent 201120462024.0 for the Hydraulic Coin Cell Crimpers MSK-110 since July 2012

Price Match Guarantee from qualifying competitors in the USA

SPECIFICATIONS:

Features	Heavy-duty steel frame PTFE Anti-Corrosion Core prevents coin cells from being short-circuited An Aluminum tray is included to put at the bottom of the crimper to avoid oil leakage by accident 100 pairs of CR2032 cells are included for immediate use
Output dimension	O.D +0.15mm after crimping (Original O.D 19.96mm, then output is about 20.11mm)
Crimping Die	One set of crimping die for CR2032, CR2025, and CR2016 is included This is consumable; please click the picture below to order a replacement Optional die available for crimping CR2325, CR2450, AG3, AG5 An optional Crimping Die Core for the 3-Electrode 2032 Coin Cell is available at extra cost.
Pressure	Max. 8 metric Tons of hydraulic pump with automatic pressure relief Recommended CR20XX series coin cell sealing pressure: 850 -1000psi Effective piston area: 11.34 cm^2
Compliance	CE Certified NRTL certification is not required due to no electric ivolved
Compliance	Patent Granted: 201120462024.0 for the Coin Cell Case Crimping since July 2012
Maintenance & Equipment Care	Electrolytes are highly corrosive; therefore, clean the die set with ethanol after each experiment to avoid corrosion damage. Also, turn the hydraulic valve to the Lock position when not in use. Please be aware that MTI will not be liable for any losses/damages from improper use, improper care & maintenance, and abuse of the product. A 13"x9" aluminum tray is included to keep the workstation clean in case of an oil leak.
Application Notes	Attention: The built-in small hydraulic pump is not designed for holding high pressure. The pressure inside will be released gradually after reaching 50~80 Kg/cm^2, (which is sufficient for assembling the coin cell). Access to the Over-pressure limit screw by removing the front panel (click the first picture below for details) Please see instructions below about changing the upper and lower die for converting the unit to MSK-110D , which disassembles crimped coin cells - How to Install the Disassembling Die on MSK-110 Crimper Click here to learn: Solution when the crimping die gets stuck Please click the picture below to order a replacement die whenever the die gets damaged Battery Video: How to Make Coin Cell by MTI's R&D Production Line ( pls click pic -right 1-2) Click here to watch the video walkthrough of replacing the lifting jack.
How to Choose MTI Crimper	MSK-110 is a hydraulic manual crimper. It is not suitable for use inside the glovebox. Mainly because there is a risk of oil leakage after long-term usage MSK-110-S is driven by inert gases, which is suitable for use inside the glovebox with N2/Ar and for faster operation. MSK-160E is driven by electricity and is good for use in the glovebox with N2/Ar. However, the crimping speed is slower than that of MSK-110-S. It has a compact size and can be transferred via the air-lock chamber of the glovebox. Attention: Please use MTI Branded Coin Cell Cases with our crimper. We don't guarantee the crimping quality if other-brand cells are used. MSK-110 MSK-110S MSK-160E

Dimension:

With handle positioned horizontally: 280mm(L) x 280mm(W) x 333mm(H)
Without handle: 228mm(L) x 176.8mm(W) x 333mm(H)
Tray: 330mm(L) x 230mm(W) (See section Maintenance & Equipment Care below for more)

Net Weight:

26 kg (58 lbs)

Shipping Weight & Size:

45 kg (100 lbs) 40" x 30" x 21"

MTI offers a One-Year limited warranty for this product.

The MTI One Year Limited Warranty does NOT cover

Consumable parts, such as graphite dies, O-rings, crucibles, screws, washers, glassware, etc.
Any damage and rust resulting from improper storage or maintenance.
Any damages caused by the use of corrosive and acidic gases.
Any damage resulting from failing to adhere to the individual product's specific operation requirements, such as water cooling, venting, etc.

Manufacturer Part Number:

Item added to your cart

Item added to your cart

Hydraulic Crimper for All Types of Coin Cells with 100 Pcs CR2032 Case - MSK-110

Hydraulic Crimper for All Types of Coin Cells with 100 Pcs CR2032 Case - MSK-110

Add-Ons

Hydraulic Crimper for All Types of Coin Cells with 100 Pcs CR2032 Case - MSK-110

Hydraulic Crimper for All Types of Coin Cells with 100 Pcs CR2032 Case - MSK-110

Choose your Variant:

Item Added to Quote!

Add-Ons

Related Products